This post is more than 5 years old
2 Posts
0
17730
August 14th, 2014 04:00
MD3000i Individual Physical Disk - Degraded Path
We recently replaced a failed HDD in our MD3000i. After letting it rebuild, all drives are at optimal status again. But Recovery Guru still gives this error:
Individual Physical Disk - Degraded Path
Degraded physical disk paths:
Channel : 0
Related physical disks: (Unknown)
Can I safely press "Recheck", or what would be the procedure I'd have to follow to get rid of this error?
No Events found!
DELL-Sam L
Moderator
•
7.7K Posts
0
August 19th, 2014 11:00
Hello dodinh,
Since you state that when you look into MDSM that all the drives are showing as optimal then you should be able to do a recheck from in the recovery guru & have it check to confirm that all drives are online & optimal. If after you run the recheck if it list any drive as still having any issues then what I would do is to check MDSM again & confirm that the drive is showing as failed. The error normally clears once a drive has been replaced but in some cases I have see it need to run the recheck to clear the error from the recovery guru.
Please let us know if you have any other questions.
dodinh
2 Posts
0
August 20th, 2014 04:00
The Recheck cleared the error; everything is working fine again. Thank you for your explanations!