Unsolved
This post is more than 5 years old
2 Intern
•
847 Posts
0
2321
August 3rd, 2009 10:00
MD3000i mirroredCacheEnable=True?
We had a controller failure on our main dual controller MD3000i. Since putting in the replacement we have had all sortof little performance issues and oddities.
Is there a way to verfy that this parameter is still set to true for all Virtual disks? The storage profile only indicates READ Cache and Write Cache and nothing about Mirrored cache?
No Events found!
mrokkam
154 Posts
0
August 3rd, 2009 13:00
What version firmware are you running on the system? I thought it did show the status of mirrored cache in the storage array profile under the virtual disks tab...
-Mohan.
JOHNADCO
2 Intern
•
847 Posts
0
August 3rd, 2009 13:00
I thought it did to. I am running the latest 2nd gen with the .61 at the end.
I tried to type the command to set enable=true on the command line, I couldn't get the syntax right. It states I have to do it for each virtual disk? I have scores of virtual disks. :(
JOHNADCO
2 Intern
•
847 Posts
0
August 3rd, 2009 13:00
I guess I did find it under there.. As write cache with mirroring enabled...
Thanks
mrokkam
154 Posts
0
August 3rd, 2009 16:00
I do believe you have to do it for each virtual disk :-S. But my understanding is that it is enabled by default when you create your Virtual Disks. Did you disable them at some point?