Start a Conversation

Unsolved

A

1 Rookie

 • 

1 Message

24

December 5th, 2023 14:48

MD3200i: Can not clear SODReboot lockdown state or enter the Service Menu

* I am not able to get the storage on "Powervault Modular Disk Storage Manager"(Not detecting while autodetecting nor cant manualy add). 

 

I have also issued "lemClearLockdown" multiple times but each time I get this at the end of the post cycle:

06/10/18-14:01:44 (tRAID): SOD Sequence is Normal, 0 on controller A
06/10/18-14:01:43 (tRAID): NOTE: Turning on tray summary fault LED
06/10/18-14:01:43 (tRAID): NOTE: SODRebootLoop- Limit:5 Cnt:5
06/10/18-14:01:43 (tRAID): NOTE: Flashing tray summary fault LED
06/10/18-14:01:43 (tRAID): WARN: Controller entering SODReboot lockdown state..


So please help me to resolve the issue. 

Reset, Power-Up Diagnostics - Loop 1 of 1
3600 Processor DRAM
     01 Data lines                                                  Passed
     02 Address lines                                               Passed
3300 NVSRAM
     01 Data lines                                                  Passed
4410 Ethernet 82574 1
     01 Register read                                               Passed
     02 Register address lines                                      Passed
6D40 Bobcat
     02 Flash Test                                                  Passed
3700 PLB SRAM
     01 Data lines                                                  Passed
     02 Address lines                                               Passed
7000 SE iSCSI BE2 1
     01 Register Read Test                                          Passed
     02 Register Address Lines Test                                 Passed
     03 Register Data Lines Test                                    Passed
3900 Real-Time Clock
     01 RT Clock Tick                                               Passed
Diagnostic Manager exited normally.


Current date: 01/04/70  time: 07:02:01

Send <BREAK> for Service Interface or baud rate change
01/04/70-07:02:01 (tRAID): SOD Sequence is Normal, 0 on controller B
01/04/70-07:02:02 (tRAID): NOTE:  Turning on tray summary fault LED
01/04/70-07:02:02 (tRAID): NOTE:  SODRebootLoop- Limit:5 Cnt:3
01/04/70-07:02:02 (tRAID): NOTE:  Installed Protocols: <MTPs: INIC SAS USB > <ITPs: RDMA ISER IPOIB > <STPs: FCP RmtDMA iSCSI SAS >
01/04/70-07:02:02 (tRAID): NOTE:  Required  Protocols: <MTPs: INIC SAS > <ITPs: UNK > <STPs: iSCSI SAS >
01/04/70-07:02:02 (tRAID): NOTE:  loading flash file: iSCSI
01/04/70-07:02:04 (tSDHC00): WARN:  sdhc::SDCardDriver::cardInitDone, discovery failure duringSend:true state:GET_OCR_CMD55 retStat:HostDriverWaitTimeout
01/04/70-07:02:04 (tRAID): NOTE:  DSM: Current revision 7
01/04/70-07:02:05 (tRAID): NOTE:  SYMBOL: SYMbolAPI registered.
01/04/70-07:02:05 (tRAID): NOTE:   RCBBitmapManager total RPA size = 1778384896
01/04/70-07:02:05 (tRAID): NOTE:  In iscsiIOQLIscsiInitDq.  iscsiIoFstrBase = 0x1
01/04/70-07:02:05 (tRAID): NOTE:  loading flash file: MTLSEBET1G
*** Disabled FULL TRACE ***
01/04/70-07:02:06 (tRAID): WARN:  MTLSE: before mtl_create_pool:IO task size: 0x140
01/04/70-07:02:06 (tRAID): NOTE:  init: ioc: 0, PLVersion: 11-075-20-00
01/04/70-07:02:07 (tRAID): WARN:  sdd::Lld::enableInterface, failed to discover SD card
01/04/70-07:02:07 (tRAID): WARN:  MLM: Failed creating m_MelNvsramLock
01/04/70-07:02:07 (tRAID): WARN:  MLM: Failed creating m_MelEventListLock
01/04/70-07:02:07 (tRAID): NOTE:  CrushMemoryPoolMgr: platform and memory (CPU MemSize:2048), adjusted allocating size to 65536 for CStripes
01/04/70-07:02:08 (tRAID): SOD: Instantiation Phase Complete
01/04/70-07:02:08 (IOSched): NOTE:  SAS Expander Added: expDevHandle:x11 enclHandle:x2 numPhys:25 port:2 ioc:0 channel:1 numEntries:22
01/04/70-07:02:08 (tRAID): WARN:  No attempt made to open Inter-Controller Communication Channels 0-0
01/04/70-07:02:08 (tRAID): NOTE:  LockMgr Role is Master
01/04/70-07:02:09 (tSasExpChk): NOTE:  Local Expander Firmware Version: 00.00.80.10
01/04/70-07:02:15 (tSasDiscCom): NOTE:  SAS: Initial Discovery Complete Time: 39 seconds since last power on/reset, 10 seconds since sas instantiated
01/04/70-07:02:15 (tRAID): NOTE:  WWN baseName 0002782b-cb5a6ca4 (valid==>SoftRst)
01/04/70-07:02:15 (tRAID): NOTE:  spmEarlyData: No data available
01/04/70-07:02:15 (tRAID): NOTE:  ServerEngines BladeEngine 2 Firmware Update Utility v2.901.242.0
Copyright 2009 ServerEngines Corpo
01/04/70-07:02:15 (tRAID): NOTE:
01/04/70-07:02:15 (tRAID): NOTE:  Found BE card 0x0 at 2.0 bar1-base 0xf0200000 bar2-base 0xf0220000 dev 0x3886754
01/04/70-07:02:15 (tRAID): NOTE:  flash_rbver = 2.0.3.768
01/04/70-07:02:15 (tRAID): NOTE:  flash_armfwver = 2.901.326.0
01/04/70-07:02:17 (tRAID): NOTE:  ufi_rbver = 2.0.3.768
01/04/70-07:02:17 (tRAID): NOTE:  ufi_armfwver = 2.901.326.0
01/04/70-07:02:17 (tRAID): NOTE:  Flash on BladeEngine at 02 : 00 matches UFI SEBE2T1G
01/04/70-07:02:17 (tRAID): WARN:  MTLSE: start: lowLevelInit Target bcmId: 0 instId 0
01/04/70-07:02:17 (tRAID): NOTE:  irq_ptr:0xd79a70
01/04/70-07:02:17 (tRAID): NOTE:  BcmId [4] PCI [2.0.4]
01/04/70-07:02:17 (tRAID): NOTE:     DevId 0x0212 VendId 0x19a2
01/04/70-07:02:17 (tRAID): NOTE:     BAR0 IO base 0xf0380000
01/04/70-07:02:17 (tRAID): NOTE:     BAR1 MEM base 0xf03a0000
01/04/70-07:02:17 (tRAID): NOTE:     BAR2 MEM base 0xf03c0000
01/04/70-07:02:18 (tRAID): WARN:  MTLSE: done: with initiator initialization: mtlInt:0x52b2640 target bcmid:0 init bcmid: 4 rc 0, phba:0x52b0140
01/04/70-07:02:18 (tRAID): NOTE:  Target:irq_ptr:0x0xd792d0, func:0x0, bcmId:0x0
01/04/70-07:02:18 (tRAID): NOTE:  VendorID 0x19a2 DeviceId 0x210 bcmId 0 BDF 2.0.0
01/04/70-07:02:18 (tRAID): NOTE:  Target:VKI_INT_CONNECT success:status:0x0
01/04/70-07:02:18 (tRAID): ERROR: Target:ISR registered:irq_ptr:0xd792d0, phba:0x3883ac8, func:0x0
01/04/70-07:02:18 (tRAID): NOTE:  BcmId [0] PCI [2.0.0]
01/04/70-07:02:18 (tRAID): NOTE:     DevId 0x0210 VendId 0x19a2
01/04/70-07:02:18 (tRAID): NOTE:     BAR0 IO base 0x00000000 size 0
01/04/70-07:02:18 (tRAID): NOTE:     BAR1 MEM base 0xf0200000 size 1
01/04/70-07:02:18 (tRAID): NOTE:     BAR2 MEM base 0xf0220000 size 1
01/04/70-07:02:18 (tRAID): NOTE:     BAR4 MEM base 0xf0240000 size 1
01/04/70-07:02:18 (tRAID): NOTE:     MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date:Mar 25 2014, Time:12:51:15
ServerEngines iSCSI Target Driver loaded
iSCSI Firmware Version:2.901.326.0
iSCSI Driver Version:2.901.242.0
Found BladeEngine2 in Gen2 x8 PCIe slot
01/04/70-07:02:19 (tRAID): NOTE:  RPA memory region : start 0x47392fe00 size 16777216 (ConIO-size 16777216) registered for pre-post data buffers on port 0
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: Default link local address on interface 1 is fe80:0000:0000:0000:7a2b:cbff:fe5a:6ca0
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: Default link local address on interface 5 is fe80:0000:0000:0000:782b:cb03:e85a:6ca0
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: Default link local address on interface 6 is fe80:0000:0000:0000:782b:cb07:d05a:6ca0
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: done: with target initialization: 0 rc 0
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: done: lowLevelInit bcmId: 0 rc 0
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: start: lowLevelInit Target bcmId: 1 instId 1
01/04/70-07:02:20 (tRAID): NOTE:  irq_ptr:0xd79888
01/04/70-07:02:20 (tRAID): NOTE:  BcmId [3] PCI [2.0.5]
01/04/70-07:02:20 (tRAID): NOTE:     DevId 0x0212 VendId 0x19a2
01/04/70-07:02:20 (tRAID): NOTE:     BAR0 IO base 0xf03e0000
01/04/70-07:02:20 (tRAID): NOTE:     BAR1 MEM base 0xf0400000
01/04/70-07:02:20 (tRAID): NOTE:     BAR2 MEM base 0xf0420000
01/04/70-07:02:20 (tRAID): WARN:  MTLSE: done: with initiator initialization: mtlInt:0x5d7f280 target bcmid:1 init bcmid: 3 rc 0, phba:0x5d85060
01/04/70-07:02:20 (tRAID): NOTE:  Target:irq_ptr:0x0xd790e8, func:0x1, bcmId:0x1
01/04/70-07:02:20 (tRAID): NOTE:  VendorID 0x19a2 DeviceId 0x210 bcmId 1 BDF 2.0.1
01/04/70-07:02:20 (tRAID): NOTE:  Target:VKI_INT_CONNECT success:status:0x0
01/04/70-07:02:20 (tRAID): ERROR: Target:ISR registered:irq_ptr:0xd790e8, phba:0x38841d8, func:0x1
01/04/70-07:02:20 (tRAID): NOTE:  BcmId [1] PCI [2.0.1]
01/04/70-07:02:20 (tRAID): NOTE:     DevId 0x0210 VendId 0x19a2
01/04/70-07:02:20 (tRAID): NOTE:     BAR0 IO base 0x00000000 size 0
01/04/70-07:02:20 (tRAID): NOTE:     BAR1 MEM base 0xf0260000 size 1
01/04/70-07:02:20 (tRAID): NOTE:     BAR2 MEM base 0xf0280000 size 1
01/04/70-07:02:20 (tRAID): NOTE:     BAR4 MEM base 0xf02a0000 size 1
01/04/70-07:02:20 (tRAID): NOTE:     MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date:Mar 25 2014, Time:12:51:15
ServerEngines iSCSI Target Driver loaded
iSCSI Firmware Version:2.901.326.0
iSCSI Driver Version:2.901.242.0
Found BladeEngine2 in Gen2 x8 PCIe slot
01/04/70-07:02:22 (tRAID): NOTE:  RPA memory region : start 0x47492fe00 size 16777216 (ConIO-size 16777216) registered for pre-post data buffers on port 1
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: Default link local address on interface 2 is fe80:0000:0000:0000:7a2b:cbff:fe5a:6ca1
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: Default link local address on interface 7 is fe80:0000:0000:0000:782b:cb03:e85a:6ca1
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: Default link local address on interface 8 is fe80:0000:0000:0000:782b:cb07:d05a:6ca1
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: done: with target initialization: 1 rc 0
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: done: lowLevelInit bcmId: 1 rc 0
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: start: lowLevelInit Target bcmId: 2 instId 2
01/04/70-07:02:23 (tRAID): NOTE:  irq_ptr:0xd796a0
01/04/70-07:02:23 (tRAID): NOTE:  BcmId [2] PCI [2.0.6]
01/04/70-07:02:23 (tRAID): NOTE:     DevId 0x0212 VendId 0x19a2
01/04/70-07:02:23 (tRAID): NOTE:     BAR0 IO base 0xf0440000
01/04/70-07:02:23 (tRAID): NOTE:     BAR1 MEM base 0xf0460000
01/04/70-07:02:23 (tRAID): NOTE:     BAR2 MEM base 0xf0480000
01/04/70-07:02:23 (tRAID): WARN:  MTLSE: done: with initiator initialization: mtlInt:0x8d6f3e0 target bcmid:2 init bcmid: 2 rc 0, phba:0x8d72060
01/04/70-07:02:23 (tRAID): NOTE:  Target:irq_ptr:0x0xd78f00, func:0x2, bcmId:0x2
01/04/70-07:02:23 (tRAID): NOTE:  VendorID 0x19a2 DeviceId 0x210 bcmId 2 BDF 2.0.2
01/04/70-07:02:23 (tRAID): NOTE:  Target:VKI_INT_CONNECT success:status:0x0
01/04/70-07:02:23 (tRAID): ERROR: Target:ISR registered:irq_ptr:0xd78f00, phba:0x38848e8, func:0x2
01/04/70-07:02:23 (tRAID): NOTE:  BcmId [2] PCI [2.0.2]
01/04/70-07:02:23 (tRAID): NOTE:     DevId 0x0210 VendId 0x19a2
01/04/70-07:02:23 (tRAID): NOTE:     BAR0 IO base 0x00000000 size 0
01/04/70-07:02:23 (tRAID): NOTE:     BAR1 MEM base 0xf02c0000 size 1
01/04/70-07:02:23 (tRAID): NOTE:     BAR2 MEM base 0xf02e0000 size 1
01/04/70-07:02:23 (tRAID): NOTE:     BAR4 MEM base 0xf0300000 size 1
01/04/70-07:02:23 (tRAID): NOTE:     MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date:Mar 25 2014, Time:12:51:15
ServerEngines iSCSI Target Driver loaded
iSCSI Firmware Version:2.901.326.0
iSCSI Driver Version:2.901.242.0
Found BladeEngine2 in Gen2 x8 PCIe slot
01/04/70-07:02:25 (tRAID): NOTE:  RPA memory region : start 0x47592fe00 size 16777216 (ConIO-size 16777216) registered for pre-post data buffers on port 2
01/04/70-07:02:25 (tRAID): WARN:  MTLSE: Default link local address on interface 3 is fe80:0000:0000:0000:7a2b:cbff:fe5a:6ca2
01/04/70-07:02:26 (tRAID): WARN:  MTLSE: Default link local address on interface 9 is fe80:0000:0000:0000:782b:cb03:e85a:6ca2
01/04/70-07:02:26 (tRAID): WARN:  MTLSE: Default link local address on interface 10 is fe80:0000:0000:0000:782b:cb07:d05a:6ca2
01/04/70-07:02:26 (tRAID): WARN:  MTLSE: done: with target initialization: 2 rc 0
01/04/70-07:02:26 (tRAID): WARN:  MTLSE: done: lowLevelInit bcmId: 2 rc 0
01/04/70-07:02:26 (tRAID): WARN:  MTLSE: start: lowLevelInit Target bcmId: 3 instId 3
01/04/70-07:02:26 (tRAID): NOTE:  irq_ptr:0xd794b8
01/04/70-07:02:26 (tRAID): NOTE:  BcmId [1] PCI [2.0.7]
01/04/70-07:02:26 (tRAID): NOTE:     DevId 0x0212 VendId 0x19a2
01/04/70-07:02:26 (tRAID): NOTE:     BAR0 IO base 0xf04a0000
01/04/70-07:02:26 (tRAID): NOTE:     BAR1 MEM base 0xf04c0000
01/04/70-07:02:26 (tRAID): NOTE:     BAR2 MEM base 0xf04e0000
01/04/70-07:02:26 (tRAID): WARN:  MTLSE: done: with initiator initialization: mtlInt:0x8ed2280 target bcmid:3 init bcmid: 1 rc 0, phba:0x8ed6060
01/04/70-07:02:26 (tRAID): NOTE:  Target:irq_ptr:0x0xd78d18, func:0x3, bcmId:0x3
01/04/70-07:02:26 (tRAID): NOTE:  VendorID 0x19a2 DeviceId 0x210 bcmId 3 BDF 2.0.3
01/04/70-07:02:26 (tRAID): NOTE:  Target:VKI_INT_CONNECT success:status:0x0
01/04/70-07:02:26 (tRAID): ERROR: Target:ISR registered:irq_ptr:0xd78d18, phba:0x3884ff8, func:0x3
01/04/70-07:02:26 (tRAID): NOTE:  BcmId [3] PCI [2.0.3]
01/04/70-07:02:26 (tRAID): NOTE:     DevId 0x0210 VendId 0x19a2
01/04/70-07:02:26 (tRAID): NOTE:     BAR0 IO base 0x00000000 size 0
01/04/70-07:02:26 (tRAID): NOTE:     BAR1 MEM base 0xf0320000 size 1
01/04/70-07:02:26 (tRAID): NOTE:     BAR2 MEM base 0xf0340000 size 1
01/04/70-07:02:26 (tRAID): NOTE:     BAR4 MEM base 0xf0360000 size 1
01/04/70-07:02:26 (tRAID): NOTE:     MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date:Mar 25 2014, Time:12:51:15
ServerEngines iSCSI Target Driver loaded
iSCSI Firmware Version:2.901.326.0
iSCSI Driver Version:2.901.242.0
Found BladeEngine2 in Gen2 x8 PCIe slot
01/04/70-07:02:28 (tRAID): NOTE:  RPA memory region : start 0x47692fe00 size 16777216 (ConIO-size 16777216) registered for pre-post data buffers on port 3
01/04/70-07:02:29 (tRAID): WARN:  MTLSE: Default link local address on interface 4 is fe80:0000:0000:0000:7a2b:cbff:fe5a:6ca3
01/04/70-07:02:29 (tRAID): WARN:  MTLSE: Default link local address on interface 11 is fe80:0000:0000:0000:782b:cb03:e85a:6ca3
01/04/70-07:02:29 (tRAID): WARN:  MTLSE: Default link local address on interface 12 is fe80:0000:0000:0000:782b:cb07:d05a:6ca3
01/04/70-07:02:29 (tRAID): WARN:  MTLSE: done: with target initialization: 3 rc 0
01/04/70-07:02:29 (tRAID): WARN:  MTLSE: done: lowLevelInit bcmId: 3 rc 0
01/04/70-07:02:29 (tRAID): SOD: Pre-Initialization Phase Complete
01/04/70-07:02:29 (tRAID): NOTE:  LogTemp Timer did not start: Engaged(0), Interval(360), isMissing(1)
01/04/70-07:02:35 (tRAID): NOTE:  ACS: Icon ping to alternate failed: -2, resp: 0
01/04/70-07:02:35 (tRAID): NOTE:  ACS: autoCodeSync(): Process start. Comm Mode: 0, Status: 0
01/04/70-07:02:35 (tRAID): WARN:  ACS: autoCodeSync(): Skipped since alt not communicating.
01/04/70-07:02:37 (tRAID): SOD: Code Synchronization Initialization Phase Complete
01/04/70-07:02:38 (NvpsPersistentSyncM): NOTE:  NVSRAM Persistent Storage updated successfully
01/04/70-07:02:38 (tRAID): NOTE:  SAFE: Process new features
01/04/70-07:02:38 (tRAID): NOTE:  SAFE: Process legacy features
01/04/70-07:02:39 (tRAID): WARN:  No backup device to write config info
01/04/70-07:02:39 (tRAID): WARN:  DVC failed to write the configuration on backup device
01/04/70-07:02:39 (tRAID): WARN:  PSTOR: PstorMgr::start cannot proceed with initialization as there is no drive added
01/04/70-07:02:39 (tRAID): WARN:  PBM::readPstorDriveRecord::Exception occurred:PstorNotConfiguredException.
01/04/70-07:02:39 (tRAID): WARN:  CCM: backupStorageUnAvailable() caught IconSendInfeasibleException Error
01/04/70-07:02:39 (tRAID): WARN:  pbm StorageManager : Exception PstorNotConfiguredException occured in creating PstorTransaction .
01/04/70-07:02:39 (tRAID): WARN:  PBM::readPstorDriveRecord::Exception occurred:
PstorNotConfiguredException.
01/04/70-07:02:39 (bdbmBGTask): ERROR: sendFreezeStateToAlternate: Exception IconSendInfeasibleException Error
01/04/70-07:02:39 (tRAID): NOTE:  SPM acquireObjects exception: IconSendInfeasibleException Error
01/04/70-07:02:40 (tRAID): NOTE:  sas: Peering Disabled (Alt unavailable)
01/04/70-07:02:40 (tRAID): NOTE:  b_isn: Peering Disabled (Alt Unavailable)
01/04/70-07:02:40 (tRAID): NOTE:  ion: Peering Disabled (Alt Unavailable)
01/04/70-07:02:41 (tRAID): NOTE:  IOCTL (0) recvd: mtl_iom_set_mtu 9000
01/04/70-07:02:41 (tRAID): NOTE:  IOCTL (0) completed: mtl_iom_set_mtu:successfully
01/04/70-07:02:42 (tRAID): NOTE:  IOCTL (1) recvd: mtl_iom_set_mtu 9000
01/04/70-07:02:42 (tRAID): NOTE:  IOCTL (1) completed: mtl_iom_set_mtu:successfully
01/04/70-07:02:43 (tRAID): NOTE:  IOCTL (2) recvd: mtl_iom_set_mtu 9000
01/04/70-07:02:43 (tRAID): NOTE:  IOCTL (2) completed: mtl_iom_set_mtu:successfully
01/04/70-07:02:44 (tRAID): NOTE:  IOCTL (3) recvd: mtl_iom_set_mtu 9000
01/04/70-07:02:45 (tRAID): NOTE:  IOCTL (3) completed: mtl_iom_set_mtu:successfully
01/04/70-07:02:46 (mtlseMgmtTask): WARN:  Port[0] MTLSE Link event: link DOWN
01/04/70-07:02:46 (mtlseMgmtTask): WARN:  Port[1] MTLSE Link event: link DOWN
01/04/70-07:02:46 (mtlseMgmtTask): WARN:  Port[2] MTLSE Link event: link DOWN
01/04/70-07:02:46 (mtlseMgmtTask): WARN:  Port[3] MTLSE Link event: link DOWN
01/04/70-07:02:46 (tRAID): WARN:  MTLSE: group iSCSI Mtl::parameterCommitCompleted without any other parameter events.
01/04/70-07:02:46 (tRAID): WARN:  MTLSE: group iSNS Mtl::parameterCommitCompleted without any other parameter events.
01/04/70-07:02:46 (tRAID): WARN:  MTLSE: iSCSI/Ctr1/Port0/C MtlInterface::parameterCommitCompleted without any other parameter events.
01/04/70-07:02:46 (tRAID): WARN:  MTLSE: iSCSI/Ctr1/Port1/C MtlInterface::parameterCommitCompleted without any other parameter events.
01/04/70-07:02:46 (tRAID): WARN:  MTLSE: iSCSI/Ctr1/Port2/C MtlInterface::parameterCommitCompleted without any other parameter events.
01/04/70-07:02:46 (tRAID): WARN:  MTLSE: iSCSI/Ctr1/Port3/C MtlInterface::parameterCommitCompleted without any other parameter events.
01/04/70-07:02:46 (tRAID): NOTE:  Controller Queue Depth is(QLTA_MAX_TRBS) = 800
01/04/70-07:02:46 (tRAID): NOTE:  The sizeof TRBext =1a0 TpbExt =70
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 1 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 2 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 3 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 1 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 2 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 3 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 1 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 2 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 3 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 1 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 2 mtlseAddress
01/04/70-07:02:47 (tRAID): WARN:  MTLSE: portal not available on 3 mtlseAddress
01/04/70-07:02:47 (tRAID): ERROR: readLogHeader(): Exception caught in MBM: PstorNotConfiguredException
01/04/70-07:02:47 (tRAID): WARN:  Unable to intialize mirror device
01/04/70-07:02:47 (tRAID): NOTE:  CacheMgr::cacheOpenMirrorDevice:: mirror device 0xfffffff
01/04/70-07:02:48 (tRAID): WARN:  CCM readBackupStatus() caught PstorNotConfiguredException
01/04/70-07:02:48 (tRAID): WARN:  CCM: checkBackupExists() Cannot read backup status from Pstor
01/04/70-07:02:48 (tRAID): WARN:  CCM: checkThisControllerBackupCheckpointOnAlt() caught exception IconSendInfeasibleException Error
01/04/70-07:03:18 (tRAID): WARN:  CCM: checkThisControllerBackupCheckpointOnAlt() caught exception IconSendInfeasibleException Error

01/04/70-07:03:48 (tRAID): WARN:  CacheManager::adjustSyncStartStop cache not configured!
01/04/70-07:03:48 (tRAID): WARN:  CCM: validateCacheMem() Invalidate cache due to Database mismatch
01/04/70-07:03:48 (tRAID): NOTE:  CCM: validateCacheMem() cache memory is invalid
01/04/70-07:03:48 (tRAID): NOTE:  CCM: validateCacheMem() Initializing my partition
01/04/70-07:03:49 (tRAID): WARN:  CCM: initialize() - exchangeRestoreStatusAlt caught IconSendInfeasibleException Error
01/04/70-07:03:49 (tRAID): WARN:  CCM cacheStoreRecordExists() caught PstorNotConfiguredException
01/04/70-07:03:49 (tRAID): WARN:  CCM writeCacheStoreToPstor() caught
01/04/70-07:03:49 (tRAID): WARN:  CCM: mirrorInit() alternate did not check in
01/04/70-07:03:50 (tRAID): WARN:  CCM writeCacheStoreToPstor() caught PstorNotConfiguredException
01/04/70-07:03:50 (tRAID): NOTE:  CCM: sodClearMOSIntentsAlt(), failure clearing MOS intents on alt
01/04/70-07:03:50 (tRAID): NOTE:  doRecovery: myMemory:1, IORCB:0, NEW:0, OLD:0
01/04/70-07:03:50 (tRAID): WARN:  CacheManager::adjustSyncStartStop cache not configured!
01/04/70-07:03:50 (tRAID): WARN:  CCM writeCacheStoreToPstor() caught PstorNotConfiguredException
01/04/70-07:03:51 (tRAID): WARN:  UWManager::initializeNvsramIWLog: foreign controller
01/04/70-07:03:51 (tRAID): WARN:  UWManager::initializeNvsramIWLog: IWLog invalidated
01/04/70-07:03:51 (tRAID): ASSERT: Assertion failed: drvP, file vdmDriveMgr.cc, line 14202

Stack Trace for tRAID:
0x0026070c vxTaskEntry  +0x5c : 0x014a04a4 (0, 0)
0x014a07b0 sodMain      +0x310: sodInitialization() ()
0x014a2330 sodInitialization()+0x30 : sodInitializeApplication() ()
0x014a2bdc sodInitializeApplication()+0xdc : ▒0t▒00x 0,6▒t~p`<t0▒(▒  l▒▒8▒▒t▒pd<0▒.▒▒2▒6v▒,t`8  Length: 0x13c Bytes
        Version ver03.0A


Current date: 01/04/70  time: 07:04:16

Moderator

 • 

3.1K Posts

December 5th, 2023 20:04

Hello ACn666,

 

Could you gather the support log and upload under the service tag of the MD3200i, link is below.

Then Direct Message (DM) me the service tag once it is uploaded.

 

MD3200i How to gather Support Information MD3xxx https://dell.to/3NdjkIE

 

 

Upload here under the Service Tag

How to Share Log Files, Screenshots, and Error Messages with Dell

https://dell.to/3Gwy2Xw

 

 

Direct Message

You can click on my name : Dell -Charles R

Look in the Right hand column:

     Contact Me

         Send this user a direct message

Please DM me the Service tag

 

You may also make a post on the thread, not to include service tag, to see if any other Moderator is available if I happen to be off shift when you send it.

No Events found!

Top