Unsolved
3 Posts
0
595
Dell precision T 3610
Hi
I have a problem with my Dell precision T 3610 workstation which have Nvidia GeForce gtx 1070 (8GB memory) graphics card. The problem is everytime system will turn off after working for 10 or 15 minutes.The problem can solve by disabling the graphics card. but whenever I enable the graphics card raising the problem again.
Please give me a solution to rectify the problem
DELL-Cares
Moderator
Moderator
•
25.2K Posts
0
September 6th, 2021 00:00
We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
mazzinia_
4 Operator
4 Operator
•
1.1K Posts
0
September 6th, 2021 01:00
Hello,
the 10-15 minutes ... are they even at idle without having any gpu intensive program launched ?
speedstep
9 Legend
9 Legend
•
47K Posts
0
September 6th, 2021 02:00
Power supply is too small.
aneesholv
3 Posts
0
September 6th, 2021 09:00
Yes .Both case the system will turn off.
bradthetechnut
6 Professor
6 Professor
•
7.6K Posts
0
September 12th, 2021 19:00
Do you have 685w or 425w PSU? GTX 1070 is a 150w card. Upgrading to 685w PSU is a much safer bet if you have the 425w.
If you already have the 685w PSU, try a different GPU.