Precision 5820 Fixed Workstation Drive Carrier Status Lights Not Functioning

I purchased a used Precision 5820 workstation with an Intel Xeon processor that didn't have an operating system. I installed two SSDs and one HDD into three of the four drive carriers located on the front of the computer, and installed Windows 11 Pro on one of the SSDs. I also installed, what I believe to be, all applicable drivers for this computer using the 'Drivers and Downloads' page on the Dell Support website. After the aforementioned setup, I noticed that the status lights on the drive carriers were not lit. After doing some research to try to solve the problem myself, I learned that the issue might be that I don't have a RAID driver installed. If this is in fact the case, I am not sure which driver I would need. I would greatly appreciate any help with this matter from the Dell Community. Thank you.