This post is more than 5 years old
4 Posts
0
1866
July 26th, 2019 05:00
Precision 7920 Rack diagnostics application
Hi guys,
can somebody tell me is there a system/hardware diagnostic application for Dell Precision 7920 Rack Workstation on Windows 10 (the one like OMSA on Windows Server Systems)?
Thamks in advance,
Hrvoje
No Events found!
bmcowboy
4 Apprentice
•
573 Posts
0
July 29th, 2019 02:00
Hi @Hrks ,
I would say, "Support Assist" is comparatively low-end diagnostic application and you could hardly get a detailed health statics of your R7920. Unfortunately, it's the only application officially from Dell in Windows interface that close to your needs.
Apart from the mentioned Dell Diagnostics 4239, you may also consider the default hard diagnostic in BIOS. That's the most detailed one I believe.
bmcowboy
4 Apprentice
•
573 Posts
1
July 26th, 2019 10:00
Hi @Hrks ,
Check this out.
<ADMIN NOTE: Broken link has been removed from this post by Dell>
"Dell Diagnostics are designed to verify proper operation of the hardware in your system outside of a high level operating system environment."
Further drivers and downloads for R7920 available here.
Hrks
4 Posts
0
July 29th, 2019 00:00
Hrks
4 Posts
0
July 29th, 2019 00:00
Thank you for the reply! I noticed that this application works outside of Windows (the workstation has to be restarted in order to start the app.). Do you know any application that can perform online diagnostics while the windows are running (this is anecessity for my appliance).
Hrks
4 Posts
1
August 1st, 2019 05:00
Thanks a lot!