Unsolved
1 Rookie
•
2 Posts
0
48
October 11th, 2025 19:12
Precision T1700, Display Issues
I replaced my Dell Precision T1700 desktop with a Tower Plus EBT 2250. I ran the T1700 thru 2 Dell monitors but I now run the EBT through them - zero display issues. I need to keep the T1700 for some applications so I bought a single monitor & connected via VGA - monitor says no signal (T1700 doesn't have HDMI ports). So I get a different monitor & connect via display port - still no signal. I connect this latter monitor to the EBT - displays like a champ. I connect the T1700 to the 2 monitors - also displays like a champ. Why can't I get a signal from my T1700 to a new, single monitor?
No Events found!
mazzinia_
4 Operator
•
1.4K Posts
0
October 23rd, 2025 08:49
Hello,
what are the specs of the 2 older monitors / what are the specs of the new monitor ?
Doc B
1 Rookie
•
2 Posts
0
October 23rd, 2025 14:54
Thanks for the response!
Old: Dell U2414H 1920x1080 Refresh rate: 60Hz Bit depth: 8 bit Color Space: SDR
New (VGA): Onn 1920x1080 75Hz ? ?
New (DP): Amazon 1920x1080 75Hz ? ?
I had read that the refresh rate wasn't an issue - was that incorrect?
mazzinia_
4 Operator
•
1.4K Posts
1
October 23rd, 2025 16:15
It shouldn't be, usually monitors handle various frequencies aside the maximum supported.
Maybe check in the monitor menu if there's some gaming mode set and change to eco mode