Unsolved
2 Intern
•
259 Posts
0
1346
October 12th, 2023 10:56
Service Mode jumper Precision 5810
Hello from Germany!
Where to find the service mode jumper?
NOT (!!!) the PW reset jumper!
Thx and best regards
Peter
0 events found
No Events found!
Unsolved
2 Intern
•
259 Posts
0
1346
October 12th, 2023 10:56
Hello from Germany!
Where to find the service mode jumper?
NOT (!!!) the PW reset jumper!
Thx and best regards
Peter
0 events found
Top
JOcean
11 Legend
•
12.6K Posts
•
69.5K Points
0
October 12th, 2023 13:11
Chino de Oro
11 Legend
•
8.3K Posts
•
46K Points
0
October 12th, 2023 17:59
While the service mode is needed and available on mobile workstations, a fixed workstation can be disconnected from AC power, then press and hold power button for 30 seconds to discharge residuary power. It will be ready for service works, no jumper is needed.
petermuss
2 Intern
•
259 Posts
0
October 12th, 2023 21:02
FYI:
5810 came w/o a service_mode jumper :-(
@JOcean
thx for the layout pic! 22 and 28 are not needed in this case.
@Chino de Oro
service_mode jumper is needed to backup the complete BIOS. Only in service_mode the whole code will be downloaded.
Good news:
NVMe boot (UEFI and legacy) is available w/o any BIOS modification.
The machine works very fast with a 1TB NVMe
JOcean
11 Legend
•
12.6K Posts
•
69.5K Points
0
October 12th, 2023 23:19
@petermuss Happy to see it all worked out!