Unsolved
3 Posts
0
410
July 15th, 2022 08:00
T5600 Video Card RTX 3050
Hello,
I have a t5600 that had a GTX1050ti vga in it. I have now replaced it with an RTX3050.
But since then I have a problem that the machine does not enter the BIOS. LEDs 1 2 3 only light amber.
If I put back the other card (GTX 1050ti), the error disappears.
Does anyone have any ideas on this?
No Events found!
speedstep
11 Legend
•
47K Posts
0
July 15th, 2022 12:00
@adamv86
Card with non uefi bios, bad card, fake card.
Bios update needed
T5600A19.exe
adamv86
3 Posts
0
July 16th, 2022 03:00
Hello,
I bought the VGA card about 4 days ago, brand new.
https://prnt.sc/d0HGMd2Umgj7
The computer has the latest bios.
https://prnt.sc/2PgHwZGrRnCd
The power supply is 825W. I've looked at cables, connectors, and everything else, but I have no idea.
The card is perfect anyway, it plays all games at full settings.
The motherboard diagnostics run without errors.
mazzinia_
6 Operator
•
1.5K Posts
•
6.3K Points
0
July 17th, 2022 13:00
wait, you mean you can boot without issues but you get those 3 leds lit if trying to enter the bios ?
Which brand is this 3050 ?
speedstep
11 Legend
•
47K Posts
0
July 17th, 2022 21:00
@adamv86
non dell cards will require secure boot off in bios
adamv86
3 Posts
0
July 18th, 2022 02:00
Hello,
T5600
RTX 3050 does not enter the bios, after pressing f2 only the 1 2 3 led lights up.
If I put the gtx1050 back in, it works perfectly.
mazzinia_
6 Operator
•
1.5K Posts
•
6.3K Points
0
July 18th, 2022 02:00
ok, but be advised that your mention that you purchased the card 4 days ago + adding a screenshot was giving that impression. (in any case knowing the brand of the gpu could be helpful... firmwares are not all the same...)
So, you tested the card in a different computer to verify it's working (thus the screenshot)