When considering a computer I like to download the various manuals, including the maintenance and configuration/setup manuals. Both documents describe the valid drive configurations.
Your computer supports one of the following configurations: ... A combination of three M.2 solid-state drives (one M.2 2280 and/or two M.2 2230 or M.2 2280).
Note that to add a drive you'll need not only the drive, but also the heat sink. If you're simply replacing a drive you can reuse the factory heat sink.
DELL-Cares
Moderator
•
27.6K Posts
0
December 29th, 2021 08:00
Welcome to Dell Social Media Support for Technical and After Sales inquiries.
Please share the Service Tag / Express Service code / Order Number via Direct / Private message in the text format for which you need assistance.
Chino de Oro
9 Legend
•
8.3K Posts
0
December 29th, 2021 15:00
@dsk96m , yes it does. Be sure to get the M.2 NVME SSD type.
rwzeitgeist
1 Rookie
•
20 Posts
0
December 29th, 2021 15:00
When considering a computer I like to download the various manuals, including the maintenance and configuration/setup manuals. Both documents describe the valid drive configurations.
The information you seek also appears on Dell's "Precision 7760 Setup and specifications" Web page:
rwzeitgeist
1 Rookie
•
20 Posts
0
January 10th, 2022 13:00
The 7760 Service Manual outlines how to remove and install an SSD in slots 3, 4, and 5 starting on page 31 ("Installing the primary M.2 SSD module").
I also discovered a Knowledge Base article titled, "Precision 7760: Teardown Removal Guide for Customer Replaceable Units" that might be helpful. This article contains a photo that highlights the locations of SSD slots 3, 4, and 5.
Note that to add a drive you'll need not only the drive, but also the heat sink. If you're simply replacing a drive you can reuse the factory heat sink.
-Bob
dsk96m
1 Rookie
•
4 Posts
0
January 10th, 2022 13:00
I can't figure or find where or how to add the second drive. The manual really doesn't say
dsk96m
1 Rookie
•
4 Posts
0
January 10th, 2022 14:00
Yea, I'm an id iot, was looking in wrong place, lol. Thank you much.