Unsolved
This post is more than 5 years old
2 Posts
0
7678
March 6th, 2005 21:00
Dimension 3000 and the 720
Read many, many of the Q &A about the 720 printer. But didn't see any concerning if it will work on the Dimension 3000 with XP. Took some of the suggestions and instructions to try and get mine running. No luck. No Lexmark Z615 or 605 listed in my choices. The support link brought me right back here to the forum. And the "my storage space" did not list windows XP. I was given the 720 with no cable or disc. I bought a cable at the local "Wally World", so no problem there. This thing recognizes that I have hooked up the 720 printer, but cannot find it to install it. After reading all the problems do I want to keep trying to install, is it worth it, and if so, how? Thanks in advance for any help. (I should add in that I am a bit dumb on these things.)
No Events found!


william_the_sco
2 Intern
•
1.4K Posts
0
March 6th, 2005 23:00
kaseyi
25 Posts
0
March 7th, 2005 13:00
Hi spicannspann. I have a Dimension 3000 with XP professional and I have the 720 printer that I got for free hooked up to it. I did get an installation disk with the printer, so that was not a problem for me. From my understanding, you can get the printer driver here
http://support.dell.com/support/downloads/format.aspx?releaseid=R80999&c=us&l=en&s=dhs&cs=19
I use the printer and it works ok. Not spectacular, but ok. It does seem to run out of ink quicker than my old HP printer and the ink cartridges are only available from Dell - so be forwarned about that.
Kasey
Message Edited by kaseyi on 03-07-2005 09:35 AM
Message Edited by kaseyi on 03-07-2005 12:39 PM
kaseyi
25 Posts
0
March 7th, 2005 13:00
(hit submit too early - see message below)
Message Edited by kaseyi on 03-07-2005 09:33 AM
sarahwest58
6 Posts
0
March 30th, 2005 13:00
spicannspann
2 Posts
0
March 31st, 2005 02:00
Message Edited by spicannspann on 03-30-2005 10:02 PM