Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

cogit3

1 Message

825

April 5th, 2005 20:00

Setting up two projectors?

We're setting up two Dell projectors to display Powerpoint presentations for church services.  Each is suspended from the ceiling about thirty feet apart.  Both will need to be accessing the same PC, which is in the same room. 
 
I looked at wireless projector adapters, but I'd have to run one to a splitter before running cable to each projector.  Then, there is always the 'run cable everywhere' method, but then I'd need a VGA booster as well to cover the distance up and down the vaulted ceiling.
 
Any ideas on how to best go about this or any sites for reference?
 
Thanks in advance.

JoeComp

2 Posts

April 20th, 2005 23:00

In my opinion, I would not try with going to a wireless adaptor.  Running the cables to me is the best way.  It also depends on how much your budget is for this.  This is how we have our system set up at our church, we have the PC running to an output selector, then having S-Video to one projector, and then from the output of that projector, ran to the other.  Or you could have a spliter running out from the output selector, and it could work the same way.  I hope this helps.

Was this post helpful?

View All

No Events found!

Top