Firmware from M640 Fail's because he didn't find any source AND how I become a .d9 or a .only File?

Hello, 

You can manually extract the archive and look into a subfolder. You can use firmimg.d9 file after extracting the .exe file. ".d9 — Contains both iDRAC and Lifecycle Controller firmware" For updating iDRAC FW you can use either Update Package for MS Windows 64-Bit or firmimg image format file.  Sometimes .exe files do not run properly on the iDRAC GUI. In such cases, as a workaround option is to download the file iDRAC and extract it. Once you extract you will get firmimg.d9 file and that file can be used in iDRAC GUI for update.

Hope that helps!

@DELL-Erman O​ 

Hello and Thank you for the fast reply!

i extract the file but in the payload directory is a .fwh File and nothing else.

Why i think it's the payload Directory:

In a other Support Ticket, he means it's create there.

Which firmware are you trying to update? This .d9 file is a valid method for iDRAC. This file extension is not found in other firmwares.

Please take a look this short video https://dell.to/3UxmF9D or you can find detailed information for alternative ways from here https://dell.to/3Q6jz9I

For example I can recommend server update utility for all updates https://dell.to/3Q6jzqe https://dell.to/3W7KLZx

@DELL-Erman O​ 

I create the exe File via the Dell Repository Manger.

Then i Download the File from the repository Manager.

And the last step is:

I start the exe and extract the file in a directory and the file ( N201DL43_signed.fwh ) is the only one in the payload sub folder.

Please check this video and try to recreate it, the following video covers how to create a manual repository in Dell EMC Repository Manager. How to create a manual repository in DRM (Dell EMC Repository Manager)

Dell Repository Manager (DRM) https://dell.to/3w0FHvt