Solved!
Go to SolutionD
dcgtechnologies
1 Rookie
•
70 Posts
0
278
December 25th, 2023 07:44
M630 Blade With HWC2014 Code
Hello,
I have an M630 Blade with a HWC2014 Code and the error message is "A hardware misconfiguration detected on BP1 Cfg." I am not sure what this means or where to look. I checked out this link:
<ADMIN NOTE: Broken link has been removed from this post by Dell>
HWC2014
- Message
- A hardware misconfiguration detected on arg1 .
- Arguments
- arg1 = name
- Detailed Description
- None.
- Recommended Response Action
- Make sure the hardware is installed correctly. Refer to the product documentation for correct configuration and installation procedures.
- Category
- System Health (HWC = Hardware Config)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 2329
- LCD Message
- A hardware misconfiguration detected on <name>. Check hardware
From the Chassis Log on Blade:
HWC2014: A hardware misconfiguration detected on BP1 Cfg.
Log Sequence Number: 109382
Detailed Description:
None.
Recommended Action:
Make sure the hardware is installed correctly. Refer to the product documentation for correct configuration and installation procedures.
It is pretty generic and does not tell me much. What do you think this means? It happens when I power off the server and pull the blade out of the VRTX and insert it back in then power it on. What do you think? Thank you.
(edited)
