Unsolved
This post is more than 5 years old
1 Rookie
•
44 Posts
0
903
February 8th, 2011 03:00
Host based splitters for Linux
Hi,
We have Recover Point configured over Windows Host based splitters and Solaris Sparc hosts based splitter. Now we want to configure Recover Point on Linux (RHEL5) . Can anyone tell us that , does Recover Point support host based splitters on RHEL5?
We have EMC Recover Point 3.3 P1 (e.92) setup.
Thanks in advance.
No Events found!
Shubh_Ram
1 Rookie
•
44 Posts
0
February 9th, 2011 01:00
Can anyone tell us the Recover Point host based splitter support for RHEL5?
Gary_Archer
1 Rookie
•
45 Posts
1
February 16th, 2011 10:00
No we don't. If you are using a CLARiiON CX4, CLARiiON CX3, or Celerra Unified or VNX series then you can use the array-based write splitter. If you are using other storage then you'll need to use an intelligent fabric based write splitter such as Brocade FAP or Cisco SANTap.
Gary