Do you have a dedicated network connection for the second mirror pair i.e. on server C you will need to create a second replication link and not use the replication nic that you are using for server A -> C for B -> C.
Server A as 2 nic (Server A 192.168.1.100 to Server C 192.168.1.200) Server B as 2 nic (Server B 192.168.10.100 to Server C 192.168.10.200) Server C as 3 nic (Server C 192.168.1.200 to Server A 192.168.1.100 & Server C 192.168.10.200 to Server B 192.168.10.100)
AutoStart Mirroring DataSources can be configured between 2 nodes only. You cannot have one Mirror going to one target node and another to a different target node.
This is currently by design.
As a suggestion, you may want to consider using the Composite DataSource.
IKP1
198 Posts
0
October 1st, 2007 08:00
Do you have a dedicated network connection for the second mirror pair i.e. on server C you will need to create a second replication link and not use the replication nic that you are using for server A -> C for B -> C.
IKP
Acorbeil
4 Posts
0
October 1st, 2007 10:00
Server A as 2 nic (Server A 192.168.1.100 to Server C 192.168.1.200)
Server B as 2 nic (Server B 192.168.10.100 to Server C 192.168.10.200)
Server C as 3 nic (Server C 192.168.1.200 to Server A 192.168.1.100 & Server C 192.168.10.200 to Server B 192.168.10.100)
Acorbeil
4 Posts
0
October 1st, 2007 11:00
"Partner mirror mismatch"
vongehr
7 Posts
0
October 24th, 2007 01:00
AutoStart Mirroring DataSources can be configured between 2 nodes only. You cannot have one Mirror going to one target node and another to a different target node.
This is currently by design.
As a suggestion, you may want to consider using the Composite DataSource.
Hope this answers your question.
Cheers,
Daniel Vongehr
EMC Technical Support