Solved!
Go to SolutionBCV - BCV Clone
Running Replication Manager 5.0.4...
I am doing testing right now and I have the following
Windows 2003 (x64) host running SE 6.4.3 (x32)*
This host has BCVs attached and I am trying to clone
to a target BCV.
*This is because SE (x64) not supported with RM.
When I run in simulate mode, it tells me
"7DA is a BCV volume; it cannot be replicated"
I made sure through symdev show that the source BCV (7DA) showed it
was "Never Established"
Why is this?....I took the destination BCV away from RM
and did a symclone command using the source BCV and it
worked just fine.
Why will this not work under RM?
I am also curious when the (x64) version of RM will be available since
I am running in production SRDF/CE (x64) with SE (x64) and I do want to
clone that system. One thread I read, said it should be available Dec '07.
I have not heard of it yet...
Any help on either issue would be greately appreciated
Thanks
Chris
I am doing testing right now and I have the following
Windows 2003 (x64) host running SE 6.4.3 (x32)*
This host has BCVs attached and I am trying to clone
to a target BCV.
*This is because SE (x64) not supported with RM.
When I run in simulate mode, it tells me
"7DA is a BCV volume; it cannot be replicated"
I made sure through symdev show that the source BCV (7DA) showed it
was "Never Established"
Why is this?....I took the destination BCV away from RM
and did a symclone command using the source BCV and it
worked just fine.
Why will this not work under RM?
I am also curious when the (x64) version of RM will be available since
I am running in production SRDF/CE (x64) with SE (x64) and I do want to
clone that system. One thread I read, said it should be available Dec '07.
I have not heard of it yet...
Any help on either issue would be greately appreciated
Thanks
Chris
- Thanks for the quick response...
I will get with my CE on getting the RPQ for the x64 version of RM Client.
We are running SRDF/CE 2.2.0.11 currently.
As far as RM itself, I am disappointed in the fact that with symclone I can do things but yet RM ties my hands. Very long time to add a reply, but did you ever get around this limitation of not being able to use a BCV as the source? I have this same issue, and like you am very disappointed that RM limits the functionality that I can already do with SE/SYMCLI. Even ECC will allow you to clone from BCV but does not perfom the additional steps of mounting and such that RM is designed for.
JamesBEMC
257 Posts
409
0
Posted March 12th, 2008 02:00
Welcome to RM Forums.
The error means that RM thinks you are trying to replicate BCV 7DA as if it were a source volume, and not a replication volume.
You cannot currently use a BCV as a source volume in RM. You could file a product enchancement request via Powerlink in order to do this.
In terms of using 32-bit Solutions Enabler, that restriction of course does apply. There is a 64-bit version of RM Client but is only released for use with SRDF/CE 2.x and is available via the RPQ channel. I believe there is no date yet in terms of a native x64 IRCCD (RM Agent).
Again, though, please file an enhancement request for same to highlight your interest in same.
Thanks - James.