Unsolved
This post is more than 5 years old
2 Intern
•
2K Posts
0
570
December 12th, 2006 09:00
Change IP
Hi,
We are using AutoStart 5.1 with Exchange module.
We want to change the Public IP for both the nodes and the virtual IP also.
Please suggest how to do this.
Regards,
Anuj
We are using AutoStart 5.1 with Exchange module.
We want to change the Public IP for both the nodes and the virtual IP also.
Please suggest how to do this.
Regards,
Anuj
No Events found!
yito1
262 Posts
0
January 9th, 2007 22:00
1) When a resource group becomes ON, turn it OFF.
2) The ftbb.prm file that exists in "C:Program FilesEMC AutoStart domain name config folder" of the node that changes Internet Protocol address is corrected.
*The address of ftbb_UseAddress_1 or ftbb_UseAddress_2 is corrected.
3) Change an IP address of a public network.
4) Reboot the node that changed.
5) [Nodes] -[A change node] -[Failure Detection and Mirroring] -[Paths Defined for Node].
Change a DomainLine in right IP.
6) Start Agent and Backbone service.
7) Turn on a resource group.
Please operate a remaining node by the same method.
Regards,
Yoshinobu Ito