Start a Conversation

Unsolved

This post is more than 5 years old

1360

November 19th, 2013 01:00

Replication job fails every Saturday

Hello,

I've setup a replication job of SQL cluster between production and disaster recovery site.

The job runs flawlessly except from all Saturdays at 7 in the morning. I'm using Replication Manager 5.4 (SP4) under Windows 2008 R2.

The error log is the following one:

2013 11 16 08:06:05 WBCLUSTER-NODE2  INFO:Replicator sessions are 37% completed

2013 11 16 08:06:20 WBCLUSTER-NODE2  INFO:Replicator sessions are 37% completed

2013 11 16 08:06:35 WBCLUSTER-NODE2  INFO:Replicator sessions are 37% completed

2013 11 16 08:06:50 WBCLUSTER-NODE2  INFO:Replicator sessions are 00% completed

2013 11 16 08:07:06 WBCLUSTER-NODE2 002024 ERROR:Failed to query replication status, error is: NBS Err:NBSSVR_DPRQST_InfoRecordNotFound.

2013 11 16 08:07:06 WBCLUSTER-NODE2  INFO:Replicator sessions are 00% completed

2013 11 16 08:07:06 WBCLUSTER-NODE2 000618 ERROR:Replication Manager was unable to unmark the Incremental SAN Copy session fs300_T3_LUN0_CKM00115100658_fs275_T10_LUN0_CKM00115100657 on array NBS Err:NBSSVR_DPRQST_SnapNotMarkedReplica.  Make sure selected source or target LUN(s) are not in SnapView Clone Synchronized state.

2013 11 16 08:07:06 WBCLUSTER-NODE2 026084 ERROR:Storage Services operation PostExecuteReplication failed with an error as follows: Storage Services has terminated with an error.

2013 11 16 08:07:06 WBCLUSTER-NODE2 026084 ERROR:Storage Services operation postExecute failed with an error as follows: Storage Services has terminated with an error.

Has anyone else faced the same issue? Any help would be greatly appreciated.

Thank you

November 19th, 2013 11:00

I have never seen this issue before, have not seen a replicator session go from 37% back to 00%.

I suggest you open an SR with support, and i suggest you start with the array team, since the error seems to be an issue with "Failed to query replication status". That indicates an issue on the array side (to me).  Please supply the appropriate array logs to assist the array team with their investigation.

November 19th, 2013 23:00

Ok Jay, thank you for your suggestion. I'm opening an SR right now.

No Events found!

Top