Unsolved
This post is more than 5 years old
16 Posts
0
1255
January 23rd, 2007 02:00
Replistor 6.1 sp2 Site blocked warnings
Hi
I am using replistor for replication over the MAN. I have 25 MBPS connectivity between my two sites. currently i am getting following error in my replistor console.
Blocking site server1.site1.INTRANET at (RcvIamAlive). Binding . Reason: Site server2.site2.INTRANET comm failed due to Communications error.
Windows-text: 10054 - An existing connection was forcibly closed by the remote host.
Windows-text: 10054 - An existing connection was forcibly closed by the remote host.
Description
The site is now blocked for the reason specified in the Windows error
text. This is usually a communications failure of some sort. represents what
the send process was doing at the time of the failure. is the protocol in use
at the time of the failure. Windows-text: 10054 - An existing connection was forcibly closed by the remote host.> is the reason
the site is blocked if not due to a Windows error code.
Resolution
1. Correct the communications problem.
2. Unblock the site, or just wait to let it auto-unblock at a later time.
As this problem occured, one of the target site gets hang or low performance. Within some seconds the sites are automatically gets unblock.
As per the error this is the problem of link between sites, but during this period the connectivity was ok, and i m able to access the server from network.
Please help, to find out the cause of this problem. is it due to link problem or due to replistor.
I am using replistor for replication over the MAN. I have 25 MBPS connectivity between my two sites. currently i am getting following error in my replistor console.
Blocking site server1.site1.INTRANET at (RcvIamAlive). Binding . Reason: Site server2.site2.INTRANET comm failed due to Communications error.
Windows-text: 10054 - An existing connection was forcibly closed by the remote host.
Windows-text: 10054 - An existing connection was forcibly closed by the remote host.
Description
The site is now blocked for the reason specified in the Windows error
text. This is usually a communications failure of some sort. represents what
the send process was doing at the time of the failure. is the protocol in use
at the time of the failure. Windows-text: 10054 - An existing connection was forcibly closed by the remote host.> is the reason
the site is blocked if not due to a Windows error code.
Resolution
1. Correct the communications problem.
2. Unblock the site, or just wait to let it auto-unblock at a later time.
As this problem occured, one of the target site gets hang or low performance. Within some seconds the sites are automatically gets unblock.
As per the error this is the problem of link between sites, but during this period the connectivity was ok, and i m able to access the server from network.
Please help, to find out the cause of this problem. is it due to link problem or due to replistor.
No Events found!
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
January 23rd, 2007 02:00
http://forums.emc.com/forums/forum.jspa?forumID=75
ezirnhel
447 Posts
0
January 23rd, 2007 09:00
Thanks,
Erich
jmcgowan11
4 Posts
0
January 25th, 2007 22:00
Site=LaEx.LaAgencia.com File=Octo_snd.cpp Line=3468 Revision=2.411.2.1
Severity=WARNING Error=0 Category=0 Process=Server
Time=1/25/2007 9:50:36 PM Millisec=785 MSG_READ
Initialization of site chex.LaAgencia.com (0) failed. Windows-text: 10060 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.