Search Results (4.9M)
Conversation Type :
All
Published Date :
Lifetime
Community Accepted Solution
Official Solution
Hi just a little warning for everybody having a T140 with an additonal PCIe graphicscard (AMD RX6500XT) After Upgrading to BIOS 2.19 the T140 stopped booting when my LG 29 in Monitor was connected via Displayport. In the iDRAC it was just mentioned that the boot process was stopped from BIOS. Afte
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Dell has released BIOS 1.1.20 for the XPS 8930 to fix some security issues. After you install this update, be sure to go into BIOS setup and confirm that the settings for UEFI Capsule Updates, Automatic BIOS Recovery, Integrity Check, Wake by LAN, etc, are set the way you want. If you changed any o
Question
•
XPS Desktops
Community Accepted Solution
Official Solution
Looking for info on this utility after not being able to apply firmware updates via the most recent SUU or by downloading the specific update for RHEL 8 for our R340s. Support said I could download the windows version of the update and apply via LifeCycle but that does not work and per this article
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Today, I update 7760 with BIOS v1.10.1. First, I download and excute .exe file, but get error message "Unable to lauch UI module". Then, I download and save .rcv file into a USB key and perform following steps, shutdown, unplug the power cable, press ESC and Ctrl simultaneously, plug the power cable
Question
•
Precision Mobile Workstations
Community Accepted Solution
Official Solution
i hi sir my name is Ali Husnain I lost my laptop yesterday I need to recovering my laptop my laptop Model No : Latitude 5520 And ST no ***private info removed*** Please give me response
Question
•
Customer Care
Community Accepted Solution
Official Solution
The integrated graphics card is starting to have issues. The display is showing a blue color and it wont accept video resolutions that used to work fine in the past. When I bought the T440 many years ago I installed a PCI graphics card in it, but the system doesn't see it. Unfortunately
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hi, Can someone please verify which Dell models of the "PCIe NVMe Extenders" are supported in Dell's T640? There are several models of these boards and IDK which one is correct? (0235NK, 03CVRN, 01YGFW). From what I can tell, only the first two were ever supported in the T640 while the 01YGFW
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Just unboxed this beast from Best Buy and in getting everything running, came to this forum to read about problems. I attached CPU-Z because I read that you can not add regular HyperX memory to the R9 because of the higher voltage requirements of the Alienware brand HyperX memory. CPU-Z shows it r
Question
•
Alienware Desktops
Community Accepted Solution
Official Solution
I purchased a T430 from a 3rd party. I wanted to take the memory to 12x32GB. However, I get random errors in the BIOS not detecting modules in different banks. I have tried different CPUs and in different configurations (dual CPU and single and different models of CPUs) but it never fully detects th
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hi. I have a couple of servers(Dell PowerEdge R730) using RAID 6(H730 Mini).And I need to expand their virtual disk capacity by adding more HDD's.But I do feel very unsure about how to do this, the manual doesn't explain this very well so I was hoping that someone can confirm following or provide s
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Looking for the PCIE retention clips for Dell R740. They seem to fall out and get lost easily, and I'd like to see if there's a part number for them and where/how to order them. Thank you!
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Hi, I'm using an old Dell PoweEdge R515 with iDrac 6. A DIMM had issues, so the IPMI started logging "Persistent correctable memory error rate has increased for a memory device at location DIMM_B3" errors, arriving to "Persistent correctable memory error logging disabled for a memory device at locat
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hi Team We are receiving critical vulnerabilities (CVE-2024-25943) related SSH version in Idracs 9 that already are in the last firmware version. ( 7.00.00.181, 7.20.30.55) seems the only way to fix this is upgrading SSH version to 10.0 , bus as I said all iDRACs have the last version, Do you know i
Question
•
Systems Management General
Community Accepted Solution
Official Solution
Hi, I have noticed that PowerEdge servers have a hidden setting for liquid cooling. After accidentally enabling it on a first boot of a system. I would like to know if it's possible to disable? I've seen some documentation and I can see it's readable from RACADM under System.ThermalConfig.LiquidCoo
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hello Sir want to know whether my Dell Battery which I had brought recently is Orginal or not And also whether it is 4Cell or 6Cell battery? . TOS76> PART NO.- 7PY0D . TOS76> TYPE F287H. Please Rply Sir.
Question
•
Inspiron
Community Accepted Solution
Official Solution
Hello, Could you please advice which models of PSU are compatible with T330 ? I have one, model D750E-S6 but not sure it is compatible. After power-on, it PSU blinks 5 times and turns-off.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Request for Unlocking Quotes for BIH During the preparation of our tender dossier, we have encountered a situation where information has been leaked. To ensure transparency and fairness in the bidding process, BIH requests that Dell unlock all Purchase Orders (POs) listed under the name EU as BIH.
Question
•
Rack Servers
Community Accepted Solution
Official Solution
Other than the backplane (N9YVX) do I need completely different nodes or can I just get a server card (VNFMF) and a cable (X50KP) for each node? Thanks!
Question
•
Rack Servers
Community Accepted Solution
Official Solution
I have a server pc. It is DELL POWER EDGE R340. I don't need any more to use it in any server related work. So I really trying to install normal windows operating system like windows 10.I want to do normal work like browsing, youtubing, and all normal works usually done in a normal pc. Please tell m
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Hello all, I have installed the SCG application and added a few PowerEdge iDRACs. Also I have installed ISM agents on the servers. The devices are shown as connected and their monitoring is enabled in SCG. So they seem to be fine. Now I need to ensure if the automatic case creation works as expecte
Question
•
Secure Connect Gateway
