Search Results (122)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
We have upgraded our 5060 thin clients. Everything works as expected except when a user pull his CAC card and comes back to logon they get "Insufficient Graphic memory to create new session". If they reboot the thin client they are then able to log back into to continue their Horizon session.
Question
•
Wyse ThinOS
Community Accepted Solution
Hello, I have obtained a several Dell Wyse 5070 clients with ThinOS - all came with 3 DP on the back and 1 DP over USB-C on the front. Individually, when using just one monitor, all of these ports work fine. Can someone tell me what should i expect if i try to connect multiple monitors? (la
Question
•
Wyse ThinOS
Community Accepted Solution
Hi all, anyone seen anything like this? We're using Wyse 3040s on ThinOS 9.1.3129 and have had this issue since we started with 9.1.1131. Our terminals are configured with WMS to point to a Citrix storefront. Our default domain policy has AD accounts configured to lock after 3 bad password attempts.
Question
•
Wyse ThinOS
Community Accepted Solution
We have quite a few ThinOS devices running 8.6+. We recently bought some new ones that came with 9.1.2101. We have some configs setup that block access to certain system configurations on the device. The device registers with WMS just fine. I look in WMS and I can see the device in a pa
Question
•
Wyse ThinOS
Community Accepted Solution
Just got a bunch of brand new ones with 9.1.2101 but I don't think that makes any difference downgrading from say, 9.1.3129 on older ones that I have here. Neither work trying the downgrade. Some of the 3040's have the 'optimized for PCoip’ sticker on the bottom, but no sign that PCoIP is in use. W
Question
•
Wyse ThinOS
Community Accepted Solution
Hello guys, I'm kind of a noob so I figured this would be the community to ask for help! I have a couple hundred devices I need to give fresh wyse images to, and was wondering if there were any easier ways. The end goal is to plug in power, ethernet, turn it on, select the OS from the grub menu, a
Question
•
Wyse & Linux
Community Accepted Solution
Hi all, This is in the wrong location I know, since I don't have the option to put it in the Wyse Software General location. I downloaded the WDM 5.7.2 and patch. Installed it on a Windows 2008 VM from fresh. When I try to go to the Rapport Licensing website, the message returns:- www.rapportli
Question
•
Wyse Hardware General
Community Accepted Solution
Hi, Where do the ThinOS firmware files go on the WMS Remote repository? Was able to get the pkg/App files recognized but not firmware WMS 2.0 guide mentions ThinosConfigFiles folder but when i place the files they don't show up on WMS cloud. Any suggestion? http
Question
•
Wyse ThinOS
Community Accepted Solution
Has anyone successfully been able to redirect webcams to a WVD session in 9.1? I've tried every version of DTOS from 9.0 up and whlist every version can preview the webcam perfectly, I'm not getting anywhere pushing it into the remote session (Windows 10)
Question
•
Wyse ThinOS
Community Accepted Solution
Hello Dell Community I'm pretty new to Dell Wyse Thin Clients. I've tried in several Ways to Pull a Custom Image and i'm always facing the same Problem. When i Pull the Image (from WDA or to USB Stick) i Succeed, but the Wyse Device Agent doesn't start after Image Pull. Not on the Device i pulled
Question
•
Wyse & Windows 10 IoT
Community Accepted Solution
We are reviewing a 3040 for potential use accessing WVD and RDS but we are struggling to work out how to add icons for BOTH connection methods to the desktop - or any other way of choosing either connection We operate RDS and WVD environments so need our users to be able to choose one or the other,
Question
•
Wyse ThinOS
Community Accepted Solution
Hello, Following Systems: WMS 3.2.0780 - Wyse 5060 LD Thin Client - Win 10 Enterprise 2016 LTSB I have Pull successful an Image with the WMS from the describe Model. This Image i try to deploy on another device of the same Model and i get an error: "Image build numver not valid". &
Question
•
Wyse & Windows 10 IoT
Community Accepted Solution
The VNC settings in both the Thin OS and Thin OS 9.x policies permit the use of VNC characters up to 16 characters. However using a third party VNC client I can connect to devices by only supplying the first 8 characters of the password.
Question
•
Wyse ThinOS
Community Accepted Solution
When I boot with F12, I choose the option to boot from "UEFI:SanDisk". Then I ran into a menu with three choises: F1=Retry F2=Setup F5=Diagnostics. It won't boot from USB. What am I doing wrong? Thanks in advance!
Question
•
Wyse ThinOS
Community Accepted Solution
Is anyone testing or using Webex Meetings VDI? i had been testing and using the beta 9.1.1036 and WEbex Meetings package 401002341.2 and it was working great. When installed the new release of 9.1.1131 and Webex package 40.10.11.15.4 its stopped working, no longer shows the - VDI banner in Webex Mee
Question
•
Wyse ThinOS
Community Accepted Solution
Due to corona we have a lot of users working at home. At the office we have some Wyse 5070 Thin Clients. When we place a 5070 Wyse at home using VPN, can we still use WMS to manage it?
Question
•
Wyse & Windows 10 IoT
Community Accepted Solution
Hi, We have to manage Wyse ThinOS for many users but we don't have one in our services. Do you know if there is a way to get Wyse ThinOS in a virtual machine ? Hyperv, Virtualbox, Vmware, ... I can't test my settings configuration and modification by myself, i should call users to verify if the W
Question
•
Wyse ThinOS
Community Accepted Solution
I know that wireless functionality is built-in to the new mobile Dell thin clients (5470's), and that I can access the wireless network settings within the Network Setup area as outlined in the Admin Guide. This is fine except when user takes the laptop offiste on a trip to somewhere like home or a
Question
•
Wyse ThinOS
Community Accepted Solution
Trying to backup the mongodb.. i use the commands mongodump --host 127.0.0.1 -u "user" –p "password" --authenticationDatabase admin --db stratus --out ".\wmsmongodump" and keep getting errors.. error: failed: error writing data for collection 'stratus.events' to disk: error reading collection
Question
•
Wyse ThinOS
Community Accepted Solution
I just purchased a Wyse 5470 with Win 10 IOT on it to test and something happened causing Windows to be corrupted. I have tried everything I know but can not resolve, so I would like to reimage the device. Dell support gave me a link to the Wyse USB Imaging tool, but not the image. Does
Question
•
Wyse & Windows 10 IoT