Search Results (6.3K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Closed
I have several UFS64 filesystems on my Unity-680, all presented to the clients as SMB shares. On another server I have a script that I need to run each time a new file is created on the filesystems. On a "normal" linux server I could have used inotify to monitor the creation of new inodes. What a
Question
•
Unity
Community Accepted Solution
Closed
Hello, all community contributors. I have Unity 300 Storage and want to change its ssh service port 22 to something else. I've already read 'Dell Unity™ Family Security Configuration Guide' but it said nothing but lists of all using ports in unity 300. (https://dl.dell.com/conten
Question
•
Unity
Community Accepted Solution
Closed
I have a customer that purchased a Powerstore 3000T and was configured as a single appliance without TOR switching. We are now in a situation where they want to add another appliance to this system to create a cluster using a 3200T. I have two questions - 1) Can we mix Gen1 and Gen2 ap
Question
•
PowerStore
Community Accepted Solution
Closed
Hi,Does the vnx simulator still exist?If so where can I download it from? Thank you Greetings
Question
•
VNX
Community Accepted Solution
Closed
I have an old Dell storage with 480G hard drives. What if I repalce the old ones with larger disk, not at the same time? Say I only replace 2*960G at a time. And when I repalce all the old ones, will the total space be expanded or I still get the space with 480G drives? In addition, the old ones are
Question
•
PowerVault
Community Accepted Solution
Closed
Hello.I have SCv3020 storage, and I am tried to setup 5 of hard drives then it gives me error:No disks eligible to be added to this disk folder could be found.I attached screen shot of them. Checked the unassigned reason, and it says: Unlicensed.Please give me some information how can I solve the so
Question
•
Compellent
Community Accepted Solution
Closed
We are using some older VNXe3200 systems still running on version 3.1.5 using the Adobe Flash Player for managing the server. Is it possible to upgrade these systems to an up-to-date version of Unisphere 4? Is there even a way of doing do without loosing the currently stored data? Thanks!
Question
•
VNX
Community Accepted Solution
Closed
Hi All, We are in the process of change the IP Address and VLAN of Unity NAS server but NAS server name will not change. Question is, will it require us to rejoin the NAS server again to AD? Will DNS AD record change automatically when we change the IP in Unity?
Question
•
Unity
Community Accepted Solution
Closed
How to reset admin password on Dell SCV2020 I have ip address and MSC How can I do it
Question
•
Compellent
Community Accepted Solution
Closed
Hi all Our company uses a Dell Storage SC4020. It have already 4 10k disks downed when we discovered. We want to repair the storage, but the os of the storage can't be normal after the any controller restart. We have tried to replaced the controllers and a equipment case.&nb
Question
•
Compellent
Community Accepted Solution
Closed
is there any impact to the replication status if i disable the "used as backup only" option do i need to recreate synchronous replication session from Site A to Site B
Question
•
Unity
Community Accepted Solution
Closed
1. Can tell me do we need to pause or delete the replication first before expanding the volume? 2. Once the replication stop or delete, then do the lun expansion on both site, resume the replication? anyone can tell me the procedure?
Question
•
Unity
Community Accepted Solution
Closed
Hi all, Just to asking. If we changes the IP in the Powerstore storage network configuration, is it all the LUN or datastore that we already present to host will be effected?
Question
•
PowerStore
Community Accepted Solution
Closed
Hi, Does anyone know if its possible to upgrade the base ME4012 that uses the SAS ports to ISCSI controller? Thanks in advance.
Question
•
PowerVault
Community Accepted Solution
Closed
Hello, I got some drives from a Unity array model SSD Dell/EMC |3.84 TB | SAS 2.5" |MZ-ILT3T8A| I tried to mount them in a Dell R430 server. The disks show up as "blocked". I have updated the firmware on the Raid Perc H730 mini controller but it is still the same. The disks have a block size
Question
•
Unity
Community Accepted Solution
Closed
Hey all - I guess I'm hitting a bit of a roadblock. I'm unable to see the virtual disks I've configured over fiber channel from my virtualization cluster. I've created a host group containing the three hosts in our virtualization cluster, and each host is (obviously) attached to its respective WWN
Question
•
PowerVault
Community Accepted Solution
Closed
Hi, We have a Unity SAN with Data Reduction enabled for LUNs. This is showing for example as 25% used capacity on the SAN itself, however the actual CSV in Failover Cluster Manager is reporting about 7% free because presumably it is not aware of compression being used on the SAN/LUN itself. This s
Question
•
Unity
Community Accepted Solution
Closed
Hi Folks I replaced the batteries 3 days ago on my SCv2020, however, the message still showing. After replaced no messages sows that the batteries were replaced, is that correct? Is there anything that I need to do to SCv202 recognize new batteries? Thank you
Question
•
Compellent
Community Accepted Solution
Closed
Hello, I'm currently trying to understand the way to make my ME4024 iscsi array balanced and avoid problems in the future. I have this conf with 2 POOLS (conf suggested by the system during the configuration of the array): POOL A : RAID 6 -> 15,5 To POOL B ; RAID 1 -> 3,7 To I needed only
Question
•
PowerVault
Community Accepted Solution
Closed
We've had a change of customer performance requirements on our VNX5600 that means we want to move away from our current (RAID 1/0 NL-SAS) File Storage Pool to a new one (RAID 1/0 SAS) and release the old disks. I believe that the Data Mover LUNs (~filestorage HLID 0-4) are on our NL-SAS pool, and so
Question
•
VNX