Search

I recently purchased a PC6248 which had been reset to factory defaults. I was able to use a console cable to run the setup wizard, but afterwards I am unable to get link on any of the front ethernet ports. I feel like I'm missing something simple, but this is a lot different than the PC5324 I have e

I have run out of ports on my 5324, so I have purchased a "lightly used" 6248 that has been reset to factory defaults. Any chance I can save myself some work and upload my backup startup file from the 5324 to the 6248? Thanks! -Mike

Dear Experts, I am wondering if someone can help with the information and procedure to access DELL Switch BIOS. If possible please comment on below queries 1. Can we access Dell Switch (S, N, Z series) BIOS menu ? 2.If yes can we secure the BIOS by configuring a "BIOS Login Password (Not the Boo

Hi I m planning deployment of private vlan on my network but i m a bit confused. I have a primary vlan 200 community vlan 201 isolated vlan 202 i have bunches of switch powerconnected 5548 that are interconnected through 2 force10 S4048-ON.  i have my workstation on switch SW1 and SW2 a

Dose anyone know the Dell part number for the reverse (PSU towards IO Panel) AC 750W power supply modules for the Dell S5000 switch? Trying to convert a standard air flow (I/O towards PSU) model into a reverse flow one. I already have the reverse flow fan modules, just trying to track down the match

Good day! I have this issue that we can't access our web service even locally if while connected to an AP that has multiple VLAN implemented on it. The port is gi 1/0/44 is configured as general port where device VLAN 20 is added as untagged ports, this gives IP to all ubiquiti AP we have. Then emp

Hi all, I Tried to update firmware to 3.0.1.9 using the admin GUI, its work. But it failed and haven't been able to GUI access. Does anyone know how to downgrade?

Are there Dell OS6 VM images available to download for Qemu / VMware / GNS3 ??

how do i configure dell S5248F switch to send alert when there is hardware issues eg. to my manageengine eventlog analyzer beside configuring snmp ?

I'm connected to the switch with the console cable and what I see are random letters and lines. It looks like the CLI is corrupted.  I push the reset button several times and it didn't work. Can you please help me reset the switch to the factory setting? Thank You,

is the smtp feature available on the S4048-ON? I have seen it on N series models so was trying to find it on S series and seems weird it is not available.

Hi I want to get suggestions on the cable and transceiver that can be used for the connection between DELL S5248F-ON and HP Procurve. The Dell is a 25G port and the HP is 10G port. copper or fiber optic?  

Hi guys I'm looking into running scripts based on neighbour adjacency change on a Dell S4048-ON firmware 9.14(2.17) I've been playing around and I cant seem to see any syslog messages for this. I have logging configured for debugging so should see everything. I see interfaces going up and down bu

Hello. Hoping I can get some advice on what I'm about to do.  I currently have four 6248 switches in a stack.  The back side of two of the switches have a 10gig module uplinking the stack to two 10GIG switches which serve my vmware/storage environment.   I have purchase four ne

Hi guys Is there anything similar to Cisco EEM on a Dell S4048-ON running 9.14(2.17) ? Im trying to run a script when a certain syslog message is received (ospf neighbour lost so network removed from ospf area) Ideally want this to happen like the Cisco EEM but am struggling  to find a way.

Hello, I am using Dell Switch S4040  and my VxRails nodes are connected to this switch ..during vxrail deployment it was able to find nodes but at the end of deployment when you reach "Validate Configuration" it fails with an error " Failed to create a workflow: Cannot find any host by auto

Hi i have a stack of 8164F switch when i type the command show system temperature System Thermal Conditions: Unit Temperature State(Celsius)---- ----------- -----------1 44 Medium2 44 Medium Temperature Sensors: Unit Description Temperature(Celsius)---- ------------------ -----------1 MAC 44

Hello there Dell comunity, I am getting a hard time to get a connection between the two devices. We are using a QSFP+ Breakout DAC QSFP-4X10G (for now just using 2 ten gigs on the 3024) Core switch Dell S4048 has this config on the port channel: interface Port-channel 2no ip addressportmode hyb

Is it true that Dell S4048 switch end support has been announced and it cannot be extended anymore? I just wanted to make sure that my vendor is not pushing me to buy new switches ..

I've gone through and attempted to setup RADIUS, but when i plug in a device, the switch never reaches out to my NPS server. Any help would be great. !System Software Version 6.7.1.17 ip address 192.168.19.8 255.255.255.0exitip default-gateway 192.168.19.1username "admin" password privilege 15 en