Search Results (1.1K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello folks, i have a question about removing old wwn's from my vmax. i run the symaccess -sid #### -dirport 7e:0 -login remove -wwn ##### and it removes the old wwn's. my question is there a way to add one back if it was accidentally removed?
Question
•
Symmetrix
Community Accepted Solution
Hello, We have a new VMAX3 and we are learning snapvx. Everything has been working great until we try cascading snaps. So here is the scenario. Source LUN = 2D Target1 LUN= 2F Target2 LUN = 30 We took a snap of 2D and linked that snap to 2F. All the data is there as expected Next we change
Question
•
Symmetrix
Community Accepted Solution
FE director utilization is going high till 65% for 4 adaptors. When I drill down each port on these frontend directors, Port 0 has 174 devices and Port 1 has 17 devices listed. Is the high utilization because of this imbalance, if yes how can reduce it.
Question
•
Symmetrix
Community Accepted Solution
Hi was on my way on learning Solution enabler installation guide,on my way of learning i found something called Solution enabler with SMI-S installable.I am now in need to what is that solution enable can provide that SMI-S cannot provide,Please guide me .
Question
•
Symmetrix
Community Accepted Solution
hello customer asked me to monitor vmax clone when start and finish , do you have any inline command to check it and also symmcli for customer ? thanks regards giacomo
Question
•
Symmetrix
Community Accepted Solution
Hi everybody! I am looking for a way to display/check hardware failures using symcli commands for VMAX/DMX arrays? Is that possible? - Why? - Because I am working as a resident on a customer that do not want to implement any other "call home" method than analogic phone/modem line to report ha
Question
•
Symmetrix
Community Accepted Solution
symdisk -sid 00001 list -by_diskgroup command lists different capacities - Total, Free and Actual. What is the difference between 'Actual' and 'Total' Capacity. 'Actual' capacity seems almost always greater than 'Total' capacity.
Question
•
Symmetrix
Community Accepted Solution
Folks, I understand the recommended hyper value per physical disk is 8 [Performance reasons?]. Any compelling reasons behind this number? I have also seen people prefer to use 8-way or 16-way meta devices in VMAX. I knew we have 8 DAs and 8 DAEs per Engine. Do they have anything in common? C
Question
•
Symmetrix
Community Accepted Solution
Folks, We need to add a new VMAX40K to a new management server [UNIX] in our environment. I have drafted steps that I need to follow, but I would like to have your expertise here. 1. Make sure ACLX device is mapped to all FAs - Especially to the FAs where I am going to connect my management ser
Question
•
Symmetrix
Community Accepted Solution
Hi all, I'm trying to add a LUN given from EMC symmetrix SAN to my Solaris 10 server. I keep getting errors when trying to label the disk using format: ug 26 20:29:08 wfaltstsr085 scsi: WARNING: /scsi_vhci/ssd@g60000970000298701218533030394231 (ssd0): Aug 26 20:29:08 wfaltstsr085 E
Question
•
Symmetrix
Community Accepted Solution
Hello all, Is there a fast way to come up with the list of all initiators that have any data being replicated on RDF1+Mir devices? I need to list all my hosts that have any data being replicated via SRDF. ECN members on an earlier question post have shown me a fast way to find the masking view
Question
•
Symmetrix
Community Accepted Solution
In Hitachi USPV, there is a shredder function to write 0 to a lun for 3 - 9 times. Business asks if such tool exist for VMAX. I never heard of such tool in Symm but want to confirm.
Question
•
Symmetrix
Community Accepted Solution
Hello. Hopefully someone can walk me through what I hope is a simple answer. I have the following defined in symclone: symclone -vse list Symmetrix ID: 000195702631 Source Device Target Devic
Question
•
Symmetrix
Community Accepted Solution
I'd like to come up with a list of all my servers that have any storage being replicated by SRDF. I know symcfg -sid xxxx list -rdfg all will give me the names of all my RDF groups. Unfortunately, their names don't follow my company's naming convention and don't include the names of the initiator
Question
•
Symmetrix
Community Accepted Solution
Hello team, VMAX 40K running 5876 code. I have a device of 128 GB thin device to be expanded to 512 GB, which is running SQL server. Device is not any part of META. Have three pools 1) FC (RAID-5 3+1) 2) EFD (RAID-5 3+1) 3) SATA RAID 6(6+2) in total. Device in question is part of FC (RAID-
Question
•
Symmetrix
Community Accepted Solution
We've recently installed a VMAX10k with three tiers (EFD, FC and SATA). FAST Policy is configured as 'free-for-all' with 100%/100%/100% for the three tiers, so the Symm can determine where to place the data. After we started migrating data to the VMAX we could see the EFD tier fill up; I've adjus
Question
•
Symmetrix
Community Accepted Solution
??
Question
•
Symmetrix
Community Accepted Solution
Hi Folks , Is there any primus solution to decode the FA wwpn of VMAX-3 FA ports ( something similar to primus soutions EMC13308 and EMC223285 for Vmax-2 and olderversions) thanks in advance Rajesh V U
Question
•
Symmetrix
Community Accepted Solution
We have a VMAX 20k with 4 Engines with Open Systems and IBM mainframe volumes. We have 1 system bay and 2 drive bays. Soon we will need to add another drive bay. At what point will we need to add new Engines? We seem to have good performance. Our important Storage Groups hav
Question
•
Symmetrix