Unsolved
1 Message
0
206
secure connect gateway Network traffic overload
Recently, I attempted to install and then uninstall Secure Connect Gateway 5.14.00.10 in vCenter 6.5 using both the GUI and PowerShell.
Unfortunately, I faced issues with PowerShell as it did not respond.
I also tried to install it from vCenter, but I could not access it through port 5700,
even after multiple attempts. And several days later,
my personal network experienced a traffic overload,
and after investigating, I found that the issue was caused by my vCenter,
which was confirmed by the switches log. Upon checking the vCenter's log,
I realized that my NIC was down in vCenter, but I am uncertain why the loop occurred.
also why the NIC was down.
DELL-Charles R
Moderator
Moderator
•
3.4K Posts
0
March 24th, 2023 13:00
Hello scg12322,
I'm glad you found the issue with vCenter.
For SCG I'll offer these resources: Verify you meet minimum requirements. Deployment directions. Troubleshooting steps if you cannot access SCG.
Secure Connect Gateway 5.x — Virtual Edition User's Guide
Page 20 - Deploy Secure Connect Gateway using Vmware vSphere Web Client
https://dell.to/3nk4cPy
This may help if you need to do some troubleshooting with SCG.
Secure Connect Gateway — Virtual Edition Troubleshooting Guide
Page 8 - Verify Minimum requirements to deploy and use Secure Connect Gateway. Including network ports that need to be open.
Page 12 - Unable to access the Secure Connect Gateway user interface
https://dell.to/3K87BtR