Unsolved
This post is more than 5 years old
5 Posts
0
829
July 19th, 2007 20:00
snmp traps
how do i get smarts to correlate the information recieved in snmp traps, and the status of various elements?
i.e. when i get a trap for a switchport down, the host that is conected to that port isn't reported as down until smarts tries to poll the device according to the regular polling interval.
i would of thought it would be "smart" enough to figure it out from the trap.
i.e. when i get a trap for a switchport down, the host that is conected to that port isn't reported as down until smarts tries to poll the device according to the regular polling interval.
i would of thought it would be "smart" enough to figure it out from the trap.
No Events found!
Dinand1
89 Posts
0
August 16th, 2007 01:00
never tried that ...
but let me try to reply ... you can do it through an asl script that will be executed upon reception of your trap and will change the status of the interface
this can be done through the trap_mgr.conf or the escalation paths
i hope this helps
cheers
Fernando