Start a Conversation

Unsolved

This post is more than 5 years old

6627

October 26th, 2004 21:00

E drive

​ My E drive will not eject when i press the button, the light stays on all the time, i've tried doing the emergency eject thing but it won't do any good, i can't find the E drive anywhere neither for example (my computer) Thanx. ​

4 Posts

October 26th, 2004 21:00

SOMEBODY PLEASE HELP!

432 Posts

October 26th, 2004 22:00

Is there a CD stuck in it?

Reboot the machine, and push the eject button while booting up.

_________________________

Dimension 4500 - Pentium 4 - 2.0 GHz
WINDOWS XP (Home Edition) SP-2 (PLUS!)
512 MB DDR SDRAM
80 GB HD 7200
64 MB GEFORCE4 Video card with TV out
SoundBlaster Live 1024 Voices Sound Card
16X DVD-ROM (LITEON LTD 163)
KHypermedia DVD+RW 8X4X8 (Nero 6.3 Ultra)
100 MB Internal Zip Drive
IEEE 1394 Firewire Card
JVC GR-D90 DV Camcorder
Fuji S3000 Digital camera
Sandisk 8 in 1 card reader
Sandisk Cruzer Mini (256 MB)
Belkin 2.0 USB Hub
HP Deskjet 970 Cxi
HP Photosmart 100

4 Posts

October 27th, 2004 19:00

No i've opened it using the emergency button thing but nothing happens......

1 Message

February 22nd, 2024 19:03

It sounds like you're having trouble ejecting your E drive, and I can definitely help you with that. Here are some steps you can try:

1. Identify the Drive:

    • Are you sure it's an E drive and not a different letter? Double-check in "This PC" or "My Computer" to confirm the drive letter.

    • Is it an external hard drive, USB flash drive, or something else? Knowing the type of drive will help narrow down the troubleshooting options.

2. Force Eject:

    • Windows: Right-click on the drive letter in "This PC" or "My Computer," then select "Eject." If that doesn't work, try the following:
        • Press the Windows key + R, type "cmd," and press Enter.
        • In the Command Prompt, type diskpart and press Enter.
        • Type list disk and press Enter to see a list of your drives.
        • Identify the disk number associated with your E drive (e.g., Disk 2).
        • Type select disk 2 (replace 2 with the actual disk number) and press Enter.
        • Type offline disk and press Enter.
        • Wait a few seconds and then try physically ejecting the drive.

    • Mac: Open "Disk Utility" and locate your drive. Select it and click the "Eject" button. If that doesn't work, hold down the Option key + Command + E to force eject all external devices.

3. Check for Running Processes:

    • Sometimes, programs might be using the drive without your knowledge. Open Task Manager (Windows) or Activity Monitor (Mac) and look for any processes accessing the drive. Close any unnecessary programs and try ejecting again.

4. Disable Fast Startup (Windows):

    • Fast Startup can sometimes prevent drives from ejecting properly. Go to Control Panel > Hardware and Sound > Power Options > Choose what the power buttons do. Click "Change settings that are currently unavailable." Uncheck "Turn on fast startup" and save changes. Restart your computer and try ejecting again.

5. Update Drivers:

    • Outdated drivers can sometimes cause issues with devices. Update your USB controller drivers and any drivers specific to your drive.

6. Check for Hardware Issues:

    • If none of the above solutions work, there might be a hardware issue with the drive or the USB port. Try connecting the drive to a different USB port or computer to see if the problem persists.

7. Emergency Eject (Last Resort):

    • This should only be done as a last resort and may void your warranty. Consult your device manual for specific instructions. Typically, it involves a small hole on the drive itself where you can insert a paperclip to physically eject it.

Remember, never forcefully remove the drive without properly ejecting it, as this can damage the drive and data.

If you've tried all of these steps and the drive still won't eject, it's best to consult a professional or the device manufacturer for further assistance.

No Events found!

Top