Unsolved
This post is more than 5 years old
14 Posts
0
941
April 9th, 2010 07:00
Failed Disk: True -or- False?
I got an ECC Alert: Physical disk drive failure - 000287890960.DF-6D D1 msg this morning. When I issue command "symdisk -sid 0960 list -failed -v" it shows this disk [Serial ID : E6WMLLNC] as "Failed Disk : True" but when I issue command "symdisk -sid 0960 list -DA 6D -interface D -tid 1 -v" is shows this same disk[Serial ID : E6WMLLNC] as "Failed Disk : False".
Can someone tell me why "symdisk -sid 0960 list -DA 6D -interface D -tid 1 -v" command does not show me the correct status? Is this cached somewhere and needs to be refreshed?
TIA ~ Ken
CEINVAP63 Fri 04/09/2010 8:20:32.08 C:\>symdisk -sid 0960 list -failed -v
Symmetrix ID : 000xxxxxxxxx
Disks Selected : 1
Director : DF-6D
Interface : D
Target ID : 1
Disk Group Number : 1
Vendor ID : IBM
Product ID : IX35L073F2DY10-0
Product Revision : IBM73LD
Serial ID : E6WMLLNC
Disk Blocks : 143113019
Block Size : 512
Actual Disk Blocks : 143374737
Total Disk Capacity (MB) : 69879
Free Disk Capacity (MB) : 695
Actual Disk Capacity (MB) : 70007
Hypers : 8
Hot Spare : False
Failed Disk : True
Hypers (8):
{
# Vol Emulation Dev Type Mirror Status Cap(MB)
--- ---- ---------------- ---- ------------- ------ -------------- --------
1 160 FBA 011D Data 2 Write Disabled 17263
2 161 FBA 013D Data 3 Write Disabled 17263
3 162 FBA 0174 RAID-5 2 Write Disabled 5766
4 163 FBA 0184 RAID-5 1 Write Disabled 5766
5 164 FBA 019C RAID-5 1 Write Disabled 5766
6 165 FBA 01B4 RAID-5 1 Write Disabled 5766
7 166 FBA 01C8 RAID-5 2 Write Disabled 5766
8 167 FBA 01DC RAID-5 2 Write Disabled 5766
}
CEINVAP63 Fri 04/09/2010 8:20:43.38 C:\>symdisk -sid 0960 list -DA 6D -interface D -tid 1 -v
Symmetrix ID : 000xxxxxxxxx
Disks Selected : 1
Director : DF-6D
Interface : D
Target ID : 1
Disk Group Number : 1
Vendor ID : IBM
Product ID : IX35L073F2DY10-0
Product Revision : IBM73LD
Serial ID : E6WMLLNC
Disk Blocks : 143113019
Block Size : 512
Actual Disk Blocks : 143374737
Total Disk Capacity (MB) : 69879
Free Disk Capacity (MB) : 695
Actual Disk Capacity (MB) : 70007
Hypers : 8
Hot Spare : False
Failed Disk : False
Hypers (8):
{
# Vol Emulation Dev Type Mirror Status Cap(MB)
--- ---- ---------------- ---- ------------- ------ -------------- --------
1 160 FBA 011D Data 2 Ready 17263
2 161 FBA 013D Data 3 Ready 17263
3 162 FBA 0174 RAID-5 2 Ready 5766
4 163 FBA 0184 RAID-5 1 Ready 5766
5 164 FBA 019C RAID-5 1 Ready 5766
6 165 FBA 01B4 RAID-5 1 Ready 5766
7 166 FBA 01C8 RAID-5 2 Ready 5766
8 167 FBA 01DC RAID-5 2 Ready 5766
}
CEINVAP63 Fri 04/09/2010 8:20:50.61 C:\>
Message was edited by: KCSCP Changed Symmetrix Serial Numbers.
SANjoker
14 Posts
0
April 9th, 2010 08:00
Yes...
CEINVAP63 Fri 04/09/2010 9:03:24.69 C:\>symdev -sid 0960 list -service_state notnormal
Symmetrix ID: 000xxxxxxxxx
Device Name Directors Device
DA :IT Config Attribute Sts (MB)
--------------------------- ------------- -------------------------------------
Cap
Sym Physical SA
--------------------------- ------------- -------------------------------------
011D Not Visible ***:* 06D:D1 RDF2+Mir N/Grp'd (m) WD -
013D Not Visible ***:* 15B:C1 RDF2+Mir N/Grp'd (m) WD -
0174 Not Visible ***:* 11A:D1 RDF2+R-5 N/Grp'd (m) WD -
0184 Not Visible ***:* 11A:D1 RAID-5 N/Grp'd (m) RW -
019C Not Visible ***:* 11A:D1 RAID-5 N/Grp'd (m) RW -
01B4 Not Visible ***:* 11A:D1 RAID-5 N/Grp'd (m) RW -
01C8 Not Visible ***:* 11A:D1 RDF2+R-5 N/Grp'd (m) WD -
01DC Not Visible ***:* 11A:D1 RDF2+R-5 N/Grp'd (m) WD -
CEINVAP63 Fri 04/09/2010 9:03:59.67 C:\>
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
1
April 9th, 2010 08:00
interesting, does this return the hypers on that disk ?
symdev list -sid 0960 list -service_state notnormal
SANjoker
14 Posts
0
April 13th, 2010 06:00
The disk was replaced yesterday afternoon but was still showing the same Serial ID. After doing a SYMCFG DISCOVER, it now shows correctly with new Vendor ID, Product ID & Serial ID. I suppose had I issued the SYMCFG DISCOVER before it was replaced it would have correctly listed it as Failed Disk: True.
CEINVAP63 Tue 04/13/2010 7:26:28.78 C:\>symdisk -sid 0960 list -DA 6D -interface D -tid 1 -v
Symmetrix ID : 000xxxxxxxxx
Disks Selected : 1
Director : DF-6D
Interface : D
Target ID : 1
Disk Group Number : 1
Vendor ID : IBM
Product ID : IX35L073F2DY10-0
Product Revision : IBM73LD
Serial ID : E6WMLLNC
Disk Blocks : 143113019
Block Size : 512
Actual Disk Blocks : 143374737
Total Disk Capacity (MB) : 69879
Free Disk Capacity (MB) : 695
Actual Disk Capacity (MB) : 70007
Hypers : 8
Hot Spare : False
Failed Disk : False
Hypers (8):
{
# Vol Emulation Dev Type Mirror Status Cap(MB)
--- ---- ---------------- ---- ------------- ------ -------------- --------
1 160 FBA 011D Data 2 Ready 17263
2 161 FBA 013D Data 3 Ready 17263
3 162 FBA 0174 RAID-5 2 Ready 5766
4 163 FBA 0184 RAID-5 1 Ready 5766
5 164 FBA 019C RAID-5 1 Ready 5766
6 165 FBA 01B4 RAID-5 1 Ready 5766
7 166 FBA 01C8 RAID-5 2 Ready 5766
8 167 FBA 01DC RAID-5 2 Ready 5766
}
CEINVAP63 Tue 04/13/2010 7:29:04.13 C:\>symdev -sid 0960 list -service_state notnormal
Symmetrix ID: 000xxxxxxxxx
Could not select any Symmetrix devices to list.
CEINVAP63 Tue 04/13/2010 7:31:59.59 C:\>symdisk -sid 0960 list -failed
Symmetrix ID : 000xxxxxxxxx
No devices were found
CEINVAP63 Tue 04/13/2010 7:39:41.91 C:\>symcfg discover
This operation may take up to a few minutes. Please be patient...
CEINVAP63 Tue 04/13/2010 7:40:19.50 C:\>symdisk -sid 0960 list -DA 6D -interface D -tid 1 -v
Symmetrix ID : 000xxxxxxxxx
Disks Selected : 1
Director : DF-6D
Interface : D
Target ID : 1
Disk Group Number : 1
Vendor ID : SEAGATE
Product ID : SX373207FC
Product Revision : C73LDDF
Serial ID : 3KT3DSCE
Disk Blocks : 143113019
Block Size : 512
Actual Disk Blocks : 143374737
Total Disk Capacity (MB) : 69879
Free Disk Capacity (MB) : 695
Actual Disk Capacity (MB) : 70007
Hypers : 8
Hot Spare : False
Failed Disk : False
Hypers (8):
{
# Vol Emulation Dev Type Mirror Status Cap(MB)
--- ---- ---------------- ---- ------------- ------ -------------- --------
1 160 FBA 011D Data 2 Ready 17263
2 161 FBA 013D Data 3 Ready 17263
3 162 FBA 0174 RAID-5 2 Ready 5766
4 163 FBA 0184 RAID-5 1 Ready 5766
5 164 FBA 019C RAID-5 1 Ready 5766
6 165 FBA 01B4 RAID-5 1 Ready 5766
7 166 FBA 01C8 RAID-5 2 Ready 5766
8 167 FBA 01DC RAID-5 2 Ready 5766
}
CEINVAP63 Tue 04/13/2010 7:40:27.56 C:\>
SANjoker
14 Posts
0
April 19th, 2010 09:00
I just needed to do a SYMCFG DISCOVER to see the correct status.