I have used vi for creating the script.
thank you

Message was edited by:
riptidemen

Hello...
I did what you ask me to... still don't work... but is a new error message...



map dev 011E to dir 08A:1 target=0, lun=001;
map dev 011F to dir 08A:1 target=0, lun=002;
map dev 0434 to dir 08A:1 target=0, lun=003;
map dev 0437 to dir 08A:1 target=0, lun=004;

"20070813_cdmaimg2_map_0313.txt" 134 lines, 5854 characters
root@kenad1 # symconfigure -sid 0313 -f 20070813_cdmaimg2_map_0313.txt previe

Execute a symconfigure operation for symmetrix '000290100313' (y/) ? y

A Configuration Change operation is in progress. Please wait...

Establishing a configuration change session...............Established.

Error occurred while Defining change number 1:
An invalid vbus mapping value was specified
Device 011E generated the failure

Terminating the configuration change session..............Done.

The configuration change session has failed.


Thank you all!!!!!!

map dev 011E to dir 08A:1 lun=001; - Try adding the below :

map dev 011E to dir 08A:1 target=0, lun=001;

Sorry ! Was the text written in Wordpad ? as seen problems when this is done so always use notepad to write scripts.

We use SUN's Leadville driver.

but at this point.. is not important that.. because we are in the mapping step



Thank you all!!!

Heldmar AFAIK every and each port may have its own lun number 1

Might need to check to see the status of the FA symcfg -sid xxx -fa all list, if not probably need to raise a call with EMC on 0870 6000 300.

Hello!!
Support have just told me that we have to unset the V flag (Volume Set Adressing), only used for HP server (as they told me).

I think now it will work...

Thank you all!!!!!!