This post is more than 5 years old
34 Posts
0
2027
Solution Enabler
Hi Expert ,
I need a command to be used to get the whole devices which are massked to a specific HBA ?
Thx alot
This post is more than 5 years old
34 Posts
0
2027
Hi Expert ,
I need a command to be used to get the whole devices which are massked to a specific HBA ?
Thx alot
Top
Avinash V
91 Posts
1
July 3rd, 2013 23:00
Since you spoke about masking, I would assume this is DMX
The command is
# symmaskdb list devs -sid XXX -wwn
If VMAX, if you know the SG then
Symaccess –sid show -type storage
Zikas
278 Posts
1
July 3rd, 2013 23:00
Hi Mohammad,
for DMX the command is symmaskdb -sid xxx -wwn xxx -v list database.This command shows also and the flags/bits if has been set to the HBA
PedalHarder
465 Posts
1
July 3rd, 2013 23:00
And if the storage group is not known:
symaccess -sid xx list view -detail
Then search the output for your WWN.
Mohammad_akkoub
34 Posts
0
July 3rd, 2013 23:00
thx alot Avinash , it works
Mohammad_akkoub
34 Posts
0
July 3rd, 2013 23:00
Thx all , really appreciate you quick response .