UNSOLVED
TF/Clone terminate
Hi - I see there is relationship for below two dev’s on dev show properties but while terminating it say
"A Copy session has not been created for the specified device(s)"
#Cat decomm
4686 46EF
# symclone -sid 123 -f decomm terminate -force
Execute 'Terminate' operation for the 1 specified device(s)
in device file 'decomm' (y/ ) ? y
'Terminate' operation execution is in progress for the device list in
device file 'decomm'. Please wait...
A Copy session has not been created for the specified device(s)
# symclone query -f decomm -sid 123
The Source device and the Target device do not form a Copy session
Device file 'decomm' does not have any devices that are Clone source devices
below is show peroperties of dev:
# symdev -sid 123 show 4686 |more
Device Physical Name : Not Visible
Device Symmetrix Name : 4686
Device Serial ID : N/A
Symmetrix ID : 0000000054321
Number of RAID Groups : 0
Attached BCV Device : N/A
Attached VDEV TGT Device : N/A
Vendor ID : EMC
Product ID : SYMMETRIX
Product Revision : 5874
Device WWN : 10000000000000000001234012345678
Device Emulation Type : FBA
Device Defined Label Type: N/A
Device Defined Label : N/A
Device Sub System Id : 0x003C
Cache Partition Name : DEFAULT_PARTITION
Thin Pool Name : FC_3R5
Device Block Size : 512
Device Capacity
{
Cylinders : 24030
Tracks : 360450
512-byte Blocks : 46137600
MegaBytes : 22528
KiloBytes : 23068800
}
Device Configuration : TDEV
Device is WORM Enabled : No
Device is WORM Protected : No
SCSI-3 Persistent Reserve: Disabled
Dynamic Spare Invoked : No
Dynamic RDF Capability : None
STAR Mode : No
STAR Recovery Capability : None
STAR Recovery State : NA
Device Service State : Normal
Device Status : Ready (RW)
Device SA Status : N/A (N/A)
Mirror Set Type : [Thin,N/A,N/A,N/A]
Mirror Set DA Status : [RW,N/A,N/A,N/A]
Mirror Set Inv. Tracks : [0,0,0,0]
Back End Disk Director Information
{
Hyper Type : Thin
Hyper Status : Ready (RW)
Disk [Director, Interface, TID] : [N/A,N/A,N/A]
Disk Director Volume Number : N/A
Hyper Number : N/A
Mirror Number : 1
}
Clone Device Information
{
Source (SRC) Device Symmetrix Name : 4686
Source (SRC) Device Group Name : N/A
Source (SRC) Composite Group Name : N/A
Target (TGT) Device Symmetrix Name : 46F4
Target (TGT) Device Group Name : N/A
Target (TGT) Composite Group Name : N/A
State of Session (SRC ====> TGT) : Copied
Percent Copied : 100%
Time of Last Clone Action : Wed Jan 12 00:15:31 2011
Clone State Flags : (Copy) (Diff)
Number of Prot. Tracks for SRC Device : 0
Number of Indir Tracks for TGT Device : 0
Number of Changed Tracks for SRC Device: 0
Number of Changed Tracks for TGT Device: 0
}
# symdev -sid 71 show 46EF
Device Physical Name : Not Visible
Device Symmetrix Name : 46EF
Device Serial ID : N/A
Symmetrix ID : 000000054321
Number of RAID Groups : 0
Attached BCV Device : N/A
Attached VDEV TGT Device : N/A
Vendor ID : EMC
Product ID : SYMMETRIX
Product Revision : 5874
Device WWN : 10000000000000000001234012345678
Device Emulation Type : FBA
Device Defined Label Type: N/A
Device Defined Label : N/A
Device Sub System Id : 0x003C
Cache Partition Name : DEFAULT_PARTITION
Thin Pool Name : SATA_3R5
Device Block Size : 512
Device Capacity
{
Cylinders : 24030
Tracks : 360450
512-byte Blocks : 46137600
MegaBytes : 22528
KiloBytes : 23068800
}
Device Configuration : TDEV
Device is WORM Enabled : No
Device is WORM Protected : No
SCSI-3 Persistent Reserve: Disabled
Dynamic Spare Invoked : No
Dynamic RDF Capability : None
STAR Mode : No
STAR Recovery Capability : None
STAR Recovery State : NA
Device Service State : Normal
Device Status : Ready (RW)
Device SA Status : N/A (N/A)
Mirror Set Type : [Thin,N/A,N/A,N/A]
Mirror Set DA Status : [RW,N/A,N/A,N/A]
Mirror Set Inv. Tracks : [0,0,0,0]
Back End Disk Director Information
{
Hyper Type : Thin
Hyper Status : Ready (RW)
Disk [Director, Interface, TID] : [N/A,N/A,N/A]
Disk Director Volume Number : N/A
Hyper Number : N/A
Mirror Number : 1
}
Message was edited by: SymmetrixForumsModerator Modified Symmetrix ID and WWN.
