why inq command does not display veritas devices /dev/vx/rdmp/

Question

Hi I have a DMX 4 and a solaris server running Solaris 10 10/09 s10s_u8wos_08a SPARCI added disk, but when i run the command inq to see the devices the command does not display veritas volumen manager devices please check the output #inq ----------------------------------------------------------------------------------------------DEVICE                              :VEND    :PROD            :REV   :SER NUM    :CAP(kb)     ----------------------------------------------------------------------------------------------/dev/rdsk/c3t50060482D53074B6d131s2 :EMC     :SYMMETRIX       :5772  :1802728000 :    35692800/dev/rdsk/c8t50060482D53074B9d131s2 :EMC     :SYMMETRIX       :5772  :1802728000 :    35692800/dev/rdsk/emcpower3c                :EMC     :SYMMETRIX       :5772  :1802728000 :    35692800 Please check the vxdisk list output root@ct7n1d5 ~ vxdisk listemcpower3s2  auto            -            -            error let me tell you that i have another server with the same configuration and in that server i dont have this issue. do you know why? Best regards

d2dowling · Answer

Have you tried running `vxdctl enable` ?

guanabacoa · Answer

Hi Yes i Ran vxdctl enable, the problem is in the inq command, because if i run vxdisk list it is displaying correctly the info. is the problem in the inq? Best regards

Boom1 · Answer

did you run symcfg discover? may be stupid solution but i have bad exp with inq so....

Symmetrix

Was this post helpful?