Unsolved
This post is more than 5 years old
1 Rookie
•
1 Message
0
24024
November 1st, 2001 16:00
DCOM Errors
I am recieving DCOM errors in my event log and have lost the servers that I was monitoring except 1. The error states
"DCOM was unable to communicate with the computer 192.168.10.1 using any of the configured protocols."
Any ideas how to fix this.
"DCOM was unable to communicate with the computer 192.168.10.1 using any of the configured protocols."
Any ideas how to fix this.
No Events found!
John_Nagle
1 Message
0
November 5th, 2001 17:00
Problem: A large number of DCOM messages appear in the "Event
Viewer" resulting in the following message:
"DCOM was unable to communicate with the computer ...
using any of the configured protocols."
Solution: Run "dcocnfg.exe" and click the "Default Protocols" tab.
Remove all of the protocols EXCEPT "Connection-oriented TCP/IP."
NOTICE: If other applications on a server require that DCOM use
protocols other than TCP/IP, they will no longer function
correctly. If this is the case, the suggested course of action is
to leave the DCOM configuration as it is.
-geo-
2 Posts
0
December 27th, 2004 13:00
-geo-
2 Posts
0
December 27th, 2004 14:00
OK, i find it .. :smileywink: