Unsolved
This post is more than 5 years old
1 Message
0
10480
February 20th, 2015 05:00
iDRAC7 stops responding when OS Loads
I have two PowerEdge R620's with iDRAC7 Enterprise, one of my servers is working fine with iDRAC, the others iDRAC connection disconnects as soon as the OS starts to load. Both system are configure the same as far as I can tell. I have tried resetting it by holding in the reset button for 20sec and unplugging server and reconnecting with no luck. Also, the "Blue" light on the iDRAC card flashes when OS is up or not and I see the activity light on the Ethernet port blink whether OS is up or not. The server that is working looks the same as well.
0 events found
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
February 20th, 2015 15:00
Hello
It sounds like the iDRAC may be configured with the same IP address as the operating system. Are the IP of the iDRAC and OS different? Is the iDRAC configured for shared or dedicated?
Thanks