3 Posts
0
1609
July 22nd, 2021 08:00
iDRAC9 cannot disable port 80/443 for management GUI
tried to disable the Web Management GUI, used the racadm command to disable WebServer, the iDRAC management GUI became not reachable, but after a day or two, the ports 80/443 became active again and can reach the iDRAC management GUI again. Firmware level = 4.20.20.20
No Events found!
holycow2021
3 Posts
0
August 2nd, 2021 08:00
the issue seems to resolved by upgrade iDRAC firmware to 4.40.0.0
DELL-Shine K
4 Operator
•
3K Posts
0
July 22nd, 2021 08:00
Did you do any other configuration after disabling web server. Can you check webserver setting once iDRAC GUI become accessible after couple of days. You can also check lifecycle log to check any configuration done on iDRAC after disabling webserver.
holycow2021
3 Posts
0
July 22nd, 2021 14:00
thanks for your response. the webserver status was still showing as "disabled" after the GUI was available again. We shutdown webserver, virtualconsole, and virtualmedia; port 5900 stayed down, only 80/443 were active again.