No Web access to DRAC5

Hi all,

 

I'm configuring a Poweredge 2900 with a DRAC5 card. I have configured the card both in the BIOS and through the management software in Windows.

 

The NICS are configured in a Team, and the DRAC card has a static IP address. If I attempt to connect to the card on another machine using the web interface, it just times out.

 

Thats with https://192.168.*.*

 

If I use http://192.168.*.* I get the SSL warning, so something is obviously running on that IP.

 

Any ideas? I'm going to configure all the remote access controllers on our existing servers (Approx 20 of them), but need to get this box working at least. (I did get it working on an old 2650 test box)

 

The management card is set to shared mode, as the direct interface has a blanking plate on it. (Does this mean its not a full featured card?)

 

Thanks

 

Adam