This post is more than 5 years old
1 Message
1
24182
May 5th, 2011 19:00
Openmanage 6.5.0 stops network connection
I installed Openmange 6.5.0 on a Dell T300 this week and it immediately drops the network connection upon installing. The network adaptor indicates that it cannot detect the connection type and so it will not allow connections. When I uninstall the manager, the connection is restored and the adapter recognizes the connection as a domain connection. I am running Server 2008 R2 standard and this a member server of the local domain.
No Events found!
DELL-Jeff M
2 Intern
•
793 Posts
1
May 6th, 2011 17:00
I have seen that before, update your NIC firmware and that should fix it. It is a good practice to update all a server's drivers and firmware before installing OMSA, but usually the problem is not that severe.
HSSKC
1 Message
0
July 23rd, 2012 15:00
Updating the Broadcom NIC firmware did it for me on an R300 that had this problem. Thanks Jeff!