I would disconnect unnecessary hardware to try to remove potential issues. I think the point at which it is giving that error is when it is creating a RAM drive to load the installation environment. If you tried to deploy using the Lifecycle Controller then you may have an existing RAM drive. If you disconnect power from the system for about 30 seconds it will delete any RAM drives from memory.
Daniel My
10 Elder
•
6.2K Posts
0
September 3rd, 2019 12:00
Hello
I would disconnect unnecessary hardware to try to remove potential issues. I think the point at which it is giving that error is when it is creating a RAM drive to load the installation environment. If you tried to deploy using the Lifecycle Controller then you may have an existing RAM drive. If you disconnect power from the system for about 30 seconds it will delete any RAM drives from memory.
Thanks