Hi YONI386,

The command should be similar to the one you used for ILO. Just replace the URI with this - 

Post to https://IP/redfish/v1/Systems/System.Embedded.1/Actions/ComputerSystem.Reset 

{
"error": {
"code": "1",
"message": {
"lang": "en-us",
"value": "failed: Unsupported Reset Type:ColdBoot"
}
}
}

{
"@odata.context": "/redfish/v1/$metadata#ComputerSystem.ComputerSystem",
"@odata.id": "/redfish/v1/Systems/System.Embedded.1",
"@odata.type": "#ComputerSystem.v1_0_2.ComputerSystem",
"Actions": {
"#ComputerSystem.Reset": {
"ResetType@Redfish.AllowableValues": [
"On",
"ForceOff",
"GracefulRestart",
"PushPowerButton",
"Nmi"
],
"target": "/redfish/v1/Systems/System.Embedded.1/Actions/ComputerSystem.Reset"
}
},
"AssetTag": "",
"BiosVersion": "2.3.4",
"Boot": {
"BootSourceOverrideEnabled": "Once",
"BootSourceOverrideTarget": "None",
"BootSourceOverrideTarget@Redfish.AllowableValues": [
"None",
"Pxe",
"Cd",
"Floppy",
"Hdd",
"BiosSetup",
"Utilities",
"UefiTarget",
"SDCard"
],
"UefiTargetBootSourceOverride": ""
},
"Description": "Computer System which represents a machine (physical or virtual) and the local resources such as memory, cpu and other devices that can be accessed from that machine.",
"EthernetInterfaces": {
"@odata.id": "/redfish/v1/Systems/System.Embedded.1/EthernetInterfaces"
},
"HostName": "",
"Id": "System.Embedded.1",
"IndicatorLED": "Off",
"Links": {
"Chassis": [
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1"
}
],
"Chassis@odata.count": 1,
"CooledBy": [
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.1A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.2A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.3A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.4A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.5A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.6A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.7A"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.1B"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.2B"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.3B"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.4B"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.5B"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.6B"
},
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Sensors/Fans/0x17||Fan.Embedded.7B"
}
],
"CooledBy@odata.count": 14,
"ManagedBy": [
{
"@odata.id": "/redfish/v1/Managers/iDRAC.Embedded.1"
}
],
"ManagedBy@odata.count": 1,
"PoweredBy": [
{
"@odata.id": "/redfish/v1/Chassis/System.Embedded.1/Power/PowerSupplies/PSU.Slot.1"
}
],
"PoweredBy@odata.count": 1
},
"Manufacturer": "Dell Inc.",
"MemorySummary": {
"Status": {
"Health": "OK",
"HealthRollUp": "OK",
"State": "Enabled"
},
"TotalSystemMemoryGiB": 256
},
"Model": "PowerEdge R630",
"Name": "System",
"PartNumber": "",
"PowerState": "On",
"ProcessorSummary": {
"Count": 2,
"Model": "Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz",
"Status": {
"Health": "OK",
"HealthRollUp": "OK",
"State": "Enabled"
}
},
"Processors": {
"@odata.id": "/redfish/v1/Systems/System.Embedded.1/Processors"
},
"SKU": "",
"SerialNumber": "",
"SimpleStorage": {
"@odata.id": "/redfish/v1/Systems/System.Embedded.1/Storage/Controllers"
},
"Status": {
"Health": "OK",
"HealthRollUp": "OK",
"State": "Enabled"
},
"SystemType": "Physical",
"UUID": ""
}

Hi Yoni386,

  Since the valid options as per the output are as below, you could try first a "ForceOff" and then an "On".

"ResetType@Redfish.AllowableValues": [

"On",
"ForceOff",
"GracefulRestart",
"PushPowerButton",
"Nmi"
],

Regards,

Mondeep

Hi Yoni386,

  The latest DMTF Redfish schema doc has these as the supported values for ResetType. "ColdBoot" is not one of them. The iDRAC GUI does give the option of "ColdBoot" but I do not know about the implementation.

Regards,

Dell-Mondeep