Thanks for the response. I forgot to mention that I am doing all the preconfiguration under WinPE. I'm not sure if I can use omconfig under this OS environment. It would have been nice if the name parameter is in raidcfg.exe.
For future reference, if this is an LSI adapter and you're willing to go off the reservation, you can use LSI's megacli tool to rename the RAID after creating it in the far user-friendlier raidcfg:
DELL-Geoff P
990 Posts
0
March 7th, 2012 15:00
I can confirm that the reference guide is correct. You may be able to use omstorage from the command line to rename it:
omconfig storage vdisk action=rename controller=1 vdisk=4 name=vd4
Let us know if this works for you.
NessAgbay
6 Posts
0
March 9th, 2012 10:00
Thanks for the response. I forgot to mention that I am doing all the preconfiguration under WinPE. I'm not sure if I can use omconfig under this OS environment. It would have been nice if the name parameter is in raidcfg.exe.
AlexKnox
15 Posts
0
October 18th, 2013 08:00
For future reference, if this is an LSI adapter and you're willing to go off the reservation, you can use LSI's megacli tool to rename the RAID after creating it in the far user-friendlier raidcfg:
MegaCli -LDSetProp -Name {name} -L{VDnum} -a{AdapterNum}
Shimpy
2 Posts
0
October 23rd, 2013 04:00
Hi,
The feature to name the virtual disk was intorduced in DTK4.2. The command is:
raidcfg -vd -vd= -ac=svdn -vdn= -c=
You can use raidcfg -h to get the help for the same.
Link to DTK4.2 CLI guide is:
ftp://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_ent_sys_mgmt/dell-opnmang-dplymnt-toolkit-v4.2_Reference%20Guide_en-us.pdf