Unsolved
This post is more than 5 years old
5 Posts
0
5381
September 3rd, 2013 10:00
SAN BOT Using Intel 10GB ISCSI card
hi folks......
i have DELL R815 Geberation 11 server with Intel ISCSI 10GB NIC Card installed.
so is it possible to use the intel iscsi 10GB card for SAN boot.
if yes then plzzzzzzzzzzzz give me some step by step config file or weblink or manual or user guide or tutorial to learn how to do that .
thnx
0 events found
No Events found!
DELL-Josh Cr
Moderator
•
9.5K Posts
0
September 3rd, 2013 10:00
It should be possible to boot from SAN. What type of SAN is it? You may need to flash the card firmware if the settings during POST do not allow you to boot to SAN.
Here is the Intel utility to flash for iSCSI remote boot support
http://www.intel.com/support/network/adapter/pro100/sb/CS-023748.htm
The intel user guides also provide information on how to set it up
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&DwnldID=11848
Here is the intel troubleshooting guide for remote boot http://www.intel.com/support/network/iscsi/remoteboot/sb/CS-031808.htm