Unsolved
1 Rookie
•
30 Posts
0
639
July 27th, 2020 05:00
Change from ISCSI to FC on Unity with Vmware hosts
Have a Unity array with Vmware ESXI hosts attached. Stirage had been provisioned through iSCSI. However FC HBAs were added to the hosts. Hosts have been zoned on SAN switch. How do I move from using iSCSI access to FC completely.
No Events found!
DELL-Sam L
Moderator
•
7.7K Posts
0
July 27th, 2020 13:00
Hello mr_robot,
Here is a link to Dell EMC Unity Family Configuring Hosts to Access Fibre Channel (FC) or
iSCSI Storage. I would double check to make sure that you have done all steps as listed in this guide. https://dell.to/30RVyJ1