‎Performance issues Unity 400 | DELL Technologies

Start a Conversation

UNSOLVED

Hemmati

updated

3 years ago

Hemmati

4 Posts

0

235

December 5th, 2023 16:39

Performance issues Unity 400

hi

I have Unity 400 with 18x1.2 10K in a Pool with Raid5 and 2x400GB SSD Fast Cache

This Storge connected to 6ESXi host with 2port per SP via EMC Brocade SAN Switch

and Create 3 LUN on pool .

I have Very low Bandwidth and Have Latency (100-400ms) and Veeam Backup Speed Maximum 30MBps when Backup VM on Host and maximum IOPS reach 1500

DS
DELL-Sam L
Community Manager
•
8052 Posts
•
34368 Points
0
0
Posted December 6th, 2023 13:49
Hello Hemmati,

What is your current OE version? Did you create a Dynamic or Traditional pool? When you configured you pool did you use the follow guide or no? https://dell.to/3NeKzTg
DS
DELL-Sam L
Community Manager
•
8052 Posts
•
34368 Points
0
0
Posted December 11th, 2023 22:39
Hello Hemmati,

It is best to open a support case for this issue.
H
Hemmati
4 Posts
0
0
Posted December 11th, 2023 16:42
Hello

I upgrade to 5.3.1.0.5.008 version and pool is Traditional .
H
Hemmati
4 Posts
0
0
Posted December 22nd, 2023 12:21
hello

Is it possible to change the pool type from traditional pools to dynamic pools without losing data?
(edited)
DJ
DELL-Josh Cr
Community Manager
•
9693 Posts
•
43676 Points
0
0
Posted December 26th, 2023 14:10
Unfortunately, it is not possible. It requires deleting the pool and creating a new one.
H
Hemmati
4 Posts
0
0
Posted January 9th, 2024 16:22
Hello
I changed the POOL type from Traditional to Dynamic and what happened to the device was that the write speed to the LUN increased to 390 Mbps, but the read speed is 30 Mbps.