Unsolved
This post is more than 5 years old
Community Manager
•
7.3K Posts
0
893
January 16th, 2018 23:00
Unity alert language setting via CLI
HI there ....
Is there anybody know how to set language for Unity alert mail via CLI ?
Seems to be I can check it but do not know how to set it ...
spa:~> uemcli -d XXXXX -u admin -p XXXXX# /event/alert/conf show
Storage system address: XXXXX
Storage system port: 443
HTTPS connection
1: Language = ja-JP <<< how to set it VIA CLI ? >>>>
E-mail from address = XXXXX@XXX.com
E-mail to addresses = XXXXX@XXX.com
E-mail severity threshold = notice
SNMP severity threshold = notice
SNMP version = 3.0
SNMP engine ID = 0x80000473050800XXXXXX
Show all pool threshold alerts = no
Rainer_EMC
4 Operator
•
8.6K Posts
0
January 17th, 2018 03:00
what are you trying to achieve ?
ayas
Community Manager
•
7.3K Posts
0
January 17th, 2018 06:00
Hi
I just want to know the command for setting up alert mail language via cli, not using via GUI.....
Rainer_EMC
4 Operator
•
8.6K Posts
0
January 17th, 2018 07:00
not sure I understand
How do you even get ja-JP there - do you have a Japanese language pack installed ?
ayas
Community Manager
•
7.3K Posts
0
January 17th, 2018 15:00
Hi Rainer_EMC,
Thanks for the reply all the time,
Yep installed language pack and chose Japanese at Unisphere @ alert setting.
Now I want to know if I can do the exact same via uemcli command. But as event/alert/conf set seems not having language option.
Rainer_EMC
4 Operator
•
8.6K Posts
0
January 17th, 2018 16:00
looks like this isnt configurable through UEMCLI
you would try if its possible through REST