This post is more than 5 years old
1 Rookie
•
9 Posts
0
4222
September 6th, 2016 06:00
Unity DPE
Hello All
As you know EMC Unity have two types of DPE as image below:
- 12 Gb 12-3.5" drive DPE
- 12 Gb 25-2.5" drive DPE
My question is what is the difference between them?
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
1
September 6th, 2016 15:00
Difference is the number and type of drives that fit into the DPE
The SP’s, interface cards, … are the same
Please see the Unity hardware information guide for more details
Panha
1 Rookie
•
9 Posts
0
September 6th, 2016 18:00
How about the Hard Disk Drive type?
I refer to Hard Disk that use in each DPE, Do they use SSD Drives or Others?
You said the difference between DPE is the number and type of drives that fit into the DPE, How about the performance?
AndreD Dell
Moderator
•
239 Posts
0
September 6th, 2016 23:00
The drives can be any type, depending on how the array is ordered and if it's a Unity Hybrid or All Flash.
The DPEs themselves should show no differences in performance.
You can check out the info hub for more info:
Unity All-Flash & Hybrid Info Hub
Rainer_EMC
4 Operator
•
8.6K Posts
0
September 7th, 2016 15:00
I would suggest to start with the Unity Family White Paper and the spec sheets
For EMC Partners there are also online Unity Trainings available through the Partner Portal on emc.com