Did you use the Unity installation guide when you installed your system? if you didn’t then I would double check that all is set correctly as is in the guide. Here is the link to the guide if you need it. https://dell.to/3aN3H4m
Which system are you copying the data from as you didn’t state that in your post? Are you using san copy to copy the data to your Unity 600 or another copy feature?
Please let us know if you have any other questions.
finally we resolved the problem. We had a warning for FC native ports that the speed is not consistent. disabled the connected dwitch ports and enabled them. now it is ok.
It would be hard to say as the ports on your unity by default should be set to auto for speed. The only way to know for sure would be to review the logs to see what happened.
Please let us know if you have any other questions.
DELL-Sam L
Moderator
•
7.8K Posts
0
April 28th, 2020 10:00
Hello Taher.Mehr,
Did you use the Unity installation guide when you installed your system? if you didn’t then I would double check that all is set correctly as is in the guide. Here is the link to the guide if you need it. https://dell.to/3aN3H4m
Which system are you copying the data from as you didn’t state that in your post? Are you using san copy to copy the data to your Unity 600 or another copy feature?
Please let us know if you have any other questions.
Taher.Mehr
2 Posts
0
May 4th, 2020 00:00
finally we resolved the problem. We had a warning for FC native ports that the speed is not consistent. disabled the connected dwitch ports and enabled them. now it is ok.
Do you know why the speed was not consistent ?
DELL-Sam L
Moderator
•
7.8K Posts
0
May 4th, 2020 16:00
Hello Taher.Mehr,
It would be hard to say as the ports on your unity by default should be set to auto for speed. The only way to know for sure would be to review the logs to see what happened.
Please let us know if you have any other questions.