This post is more than 5 years old
12 Posts
0
138511
November 14th, 2011 10:00
vFoglight for Storage is extremely slow!!!
Hello,
I'm running vFogStorage (v 1.6) on a VM (vSphere 4.1U1) with 2 vCPU's, 6GB RAM & 4 vDisk (on a Netapp array with 17x15K SAS disks). The VM itself is running fine but vFogStorage is extremely slow and becomes unresponsive for moments.
I've tried using the console installed on the vFogStorage Server and also using it from a remote admin desktop. In both cases the console freezes randomly and after a while it resumes to respond, but when using from the remote admin desktop it's practically unusable as freeze periods are larger than on the local server.
It's possible to tune up the system to accelerate it?
No Events found!
DELL-Mike Mck
24 Posts
0
March 22nd, 2012 14:00
vFoglight Storage has a patch available that resolves this issue. This problem was taken offline and the problem was identified.
Version 1.6.1 will have this patch included and has fixed several performance issues.
Mike
DELL-Mike Mck
24 Posts
0
November 14th, 2011 17:00
I would like to get a better Idea of your environment.
Did you install 1.6 as a fresh install or as an upgrade?
How many VCs, ESX hosts, and VM are you collecting from?
How many Storage Devices are you collecting from?
How many switches are you collecting from?
Are the vDisks on different aggregates on the Netapp, or are you only running a single one?
Thanks
Mike
josegerez1
12 Posts
0
November 15th, 2011 06:00
Hello Mike,
I've installed 1.5.2, then upgraded to 1.5.3 and then to 1.6. In all versions vFogStorage is very slow.
The vDisks are all on the same agregate. It's a RAID-DP with 15+2 600GB SAS 15k disks.
Regards
Jose
DELL-Mike Mck
24 Posts
0
November 15th, 2011 14:00
Jose,
I opened a case so we can get a support bundle. Let me know if you do not receive notification of the case.
Thanks,
Mike
DELL-Mike Mck
24 Posts
0
May 24th, 2012 14:00
Version 1.6.1 has resolved the performance problems - Confirmed