Start a Conversation

Unsolved

This post is more than 5 years old

P

189

July 11th, 2006 03:00

A few major problems hjt log attached






























































3.3K Posts

July 11th, 2006 20:00

Please download Look2Me-Destroyer.exe to your desktop.
  • * Close all windows before continuing.
    * Double-click Look2Me-Destroyer.exe to run it.
    * Put a check next to Run this program as a task.
    * You will receive a message saying Look2Me-Destroyer will close and re-open in approximately 1 minute. Click OK
    * When Look2Me-Destroyer re-opens, click the Scan for L2M button, your desktop icons will disappear, this is normal.
    * Once it's done scanning, click the Remove L2M button.
    * You will receive a Done Scanning message, click OK.
    * When completed, you will receive this message: Done removing infected files! Look2Me-Destroyer will now shutdown your computer, click OK.
    * Your computer will then shutdown.
    * Turn your computer back on.

If you receive a runtime error '339' please download MSWINSCK.OCX from the link below and place it in your C:\Windows\System32 Directory.
http://www.ascentive.com/support/new/images/lib/MSWINSCK.OCX

Then you click the Remove L2M button and wait for it to give you a message when you click ok on it it should shut itself down.

Download About:Buster from one of these locations:
malwarebytes.org
subratam.org
majorgeeks.com
About:Buster Tutorial (recommended to run in "Safe Mode")
1. Extract About:Buster to your desktop or its own folder. Click "Extract all" in the box that pops up, then "Next". Make sure "Show extracted files" is checked, then click "Finish".
2. Reboot into "Safe Mode" by repeatedly tapping the F8 key as soon as the computer beings to boot.
3. Open the AboutBuster folder and double-click AboutBuster.exe to launch the program.
4. Click the "Begin Removal" button. It will shut down all Explorer windows (if open) while it works and begin to check your computer for malicious files. If asked if you would like to do a second pass, allow it to do so.
5. AboutBuster will finish and open a new page. Follow the instructions for protection on that page.
6. When it has finished, click "Save Log". Copy/paste it into notepad and save as a .txt file so you can post it in your next reply.
7. Reboot into "Normal Mode" again and then run About:Buster following the same instructions as above but do not restart when done.

Note: If you receive any error messages please open the readme file in the AboutBuster folder and follow the directions provided for correcting that error.

The readme file contains info on these Errors Codes:
Error Code Missing msvbvm60.dll
Error Code 339 Missing comctl32.ocx
Error Code Missing mscomctl.ocx
Error Removing
Solution: Run AboutBuster once again or enter safe mode.

Download Ewido anti-spyware to your desktop.
This is a 30 day free trial. At the end of the 30-day trial period the full version features (active guard, automatic updates...) will be deactivated and the program will become a feature-limited freeware version...You can still keep it and use it for "On Demand" scanning.
  • Double click the icon on the desktop to launch the set up program.
  • Select Change state to inactivate "Resident Shield" and "Automatic Updates". Right click on ewido in the system tray and uncheck "Start with Windows".
  • Once the setup is complete you will need to update the definition files.
  • On the main screen select the icon Update then select the Update now link.
  • Next select the Start Update button, the update will start and a progress bar will show the updates being installed.
  • Once the update has completed select the Scanner icon at the top of the screen, then select the Settings tab.
  • Once in the Settings screen click on Recommended actions and then select Quarantine.
  • Under Reports
  • Select Automatically generate report after every scan
  • Un-Select Only if threats were found

Close ewido anti-spyware.

Please boot into Safe mode:

Restart the computer and immediately begin tapping the F8 key (or F5 on some Dell machines).
Use the arrow keys to highlight Safe Mode and press the Enter key. Once in safe mode, continue with the instructions below:

  • Launch ewido anti-spyware by double-clicking the icon on your desktop.
  • Select the Scanner icon at the top, then the Scan tab then click on Complete System Scan.
  • ewido will now begin the scanning process, be patient this may take some time.
  • When prompted of an infection, please select Apply all actions

Once the scan is complete do the following:
  • Next select the Reports icon at the top.
  • Select the Save report as button in the lower left hand of the screen and save it to your Desktop.
Now close ewido anti-spyware.

Reboot back into your normal user mode, post a new HijackThis log and the log from your Ewido scan. Thanks!
No Events found!

Top