This post is more than 5 years old
3 Posts
0
1582
December 28th, 2013 18:00
OR HOT PUSH error VMAX - VNX
Hello ,
I am trying to push data from VMAX to VNX and recieving below error message .
-bash-3.2$ sudo symrcopy -sid xxxx -f xxxx-PUSH -push -hot create -nop
'Create' operation execution is in progress for the device list
in device file 'xxxx-PUSH'. Please wait...
The ORS create operation failed, see the SYMAPI log file for more information
when i verified symapi log here is what it see .
| 12/28/2013 17:32:21.580 | 398 | 2 EMC:SYMRCOPY | SymRemoteCopyControl STARTING a REMOTE Copy CREATE (PUSH) (HOT) (DIFFERENTIAL) (COPY) |
| 12/28/2013 17:32:21.580 | 398 STARTING a RCOPY 'CREATE' operation. |
| 12/28/2013 17:32:22.023 | 398 | 2 EMC:SYMRCOPY | checkForCreateFai Create failed on dev:0A62, sid:00019260xxxx, status:loc_sts:0x8 SYSC_SESSION_DISCOVER_FAILED |
| 12/28/2013 17:32:22.023 | 398 | 2 EMC:SYMRCOPY | map_discover_erro loc_dir:07E, rem_num:0, rem_sts:0x1SANCOPY_DEV_SUCCESS |
| 12/28/2013 17:32:22.023 | 398 | 2 EMC:SYMRCOPY | map_discover_erro loc_dir:08E, rem_num:0, rem_sts:0xeSANCOPY_DEV_WRONG_TYPE_OF_DEVICE |
| 12/28/2013 17:32:22.023 | 398 | 2 EMC:SYMRCOPY | checkForCreateFai Discover failed on dev:0A62, sid:00019260xxxx, status:10090 |
| 12/28/2013 17:32:23.094 | 398 | 2 EMC:SYMRCOPY | SymRemoteCopyControl The Rcopy 'CREATE' operation FAILED. (SYMAPI_C_RCOPY_MULT_SESS_DEF_ERR) |
Dir 7E 0 is connected to VNX since i don't want involve both FA s
Here is the file i am trying to use
| #symdev=xxxx:0A62 | wwn=60:06:01:60:20:01:36:00:8D:E8:A0:C7:67:67:E3:11 |
| symdev=xxxx:0A63 | wwn=60:06:01:60:20:01:36:00:8F:E8:A0:C7:67:67:E3:11 |
You help is appreciated.
Thanks,
hari.
0 events found
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
December 28th, 2013 20:00
run symdev show for that device, every FA that device is mapped to needs to be zoned to VNX, and those same ports need to be registered and be part of the storage group.
dynamox
9 Legend
•
20.4K Posts
0
December 28th, 2013 18:00
i think you have to zone every dir that your source device is mapped to ..and add those dir to VNX storage group.
Hari-CC
3 Posts
0
December 28th, 2013 19:00
Thanks for your quick response Dynamox , devices are dded to a SG in VNX and i can also see them in VMAX , looks like zoning second FA might help .
-bash-3.2$ sudo symsan -sid xx list -sanports -dir 7e -p 0 | more
Symmetrix ID: 0001926xxxx
Flags Num
DIR:P I Vendor Array LUNs Remote Port WWN
----- ----- ------------- ---------------- ---- --------------------------------
07E:0 . EMC CLARiiON APM0013377xxxx 16 xxxx16308600D47
07E:0 . EMC CLARiiON APM0013377xxxx 16 xxxx6016B08600D47
Legend:
Flags: (I)ncomplete : X = record is incomplete, . = record is complete.
-bash-3.2$ sudo symsan -sid xx -sanluns -wwn xxxxx6308600D47 -dir 7e -p 0 | more
Missing action.
-bash-3.2$ sudo symsan -sid xxx list -sanluns -wwn xxxxx016308600D47 -dir 7e -p 0 | more
Symmetrix ID: xxxxx
Remote Port WWN: xxxxx
ST
A
T Flags Block Capacity LUN Dev LUN
DIR:P E ICRTHS Size (MB) Num Num WWN
----- -- ------- ----- ----------- ----- ----- --------------------------------
07E:0 RW ...F.. 512 7168 0 00410 60060160200136008DE8A0C76767E311
07E:0 RW ...F.. 512 7168 1 00411 60060160200136008FE8A0C76767E311
07E:0 RW ...F.. 512 7168 2 00412 600601602001360091E8A0C76767E311
07E:0 RW ...F.. 512 7168 3 00413 600601602001360093E8A0C76767E311
07E:0 RW ...F.. 512 7168 4 00414 600601602001360095E8A0C76767E311
07E:0 RW ...F.. 512 7168 5 00415 600601602001360097E8A0C76767E311
07E:0 RW ...F.. 512 7168 6 00416 600601602001360099E8A0C76767E311
07E:0 RW ...F.. 512 7168 7 00417 60060160200136009BE8A0C76767E311
07E:0 RW ...F.. 512 7168 8 00418 60060160200136009DE8A0C76767E311
07E:0 RW ...F.. 512 7168 9 00419 60060160200136009FE8A0C76767E311
07E:0 RW ...F.. 512 7168 10 00420 6006016020013600A1E8A0C76767E311
07E:0 RW ...F.. 512 7168 11 00421 6006016020013600A3E8A0C76767E311
07E:0 RW ...F.. 512 7168 12 00422 6006016020013600A5E8A0C76767E311
07E:0 RW ...F.. 512 7168 13 00423 6006016020013600A7E8A0C76767E311
07E:0 RW ...F.. 512 7168 14 00424 6006016020013600A9E8A0C76767E311
07E:0 RW ...F.. 512 7168 15 00425 6006016020013600ABE8A0C76767E311
Legend:
Flags: (I)ncomplete : X = record is incomplete, . = record is complete.
(C)ontroller : X = record is controller, . = record is not controller.
(R)eserved : X = record is reserved, . = record is not reserved.
(T)ype : A = AS400, F = FBA, C = CKD, . = Unknown
t(H)in : X = record is a thin dev, . = record is not a thin dev.
(S)ymmtrix : X = Symmetrix device, . = not Symmetrix device.
-bash-3.2$ sudo symsan -sid xx list -hba -dir 7e -p 0 | more
Symmetrix ID: xxx
DIR:P Remote HBA WWN
----- --------------------------------
07E:0 20000025B5B110AF
07E:0 20000025B5B211CF
07E:0 20000025B5B110BF
07E:0 20000025B5B2106F
07E:0 20000025B5B110EF
07E:0 20000025B5B2107F
07E:0 20000025B5B110FF
07E:0 20000025B5B2104F
07E:0 20000025B5B110DF
07E:0 20000025B5B2109F
07E:0 20000025B5B110CF
07E:0 20000025B5B2105F
07E:0 20000025B5B2102F
07E:0 20000025B5B1117F
07E:0 20000025B5B2103F
07E:0 20000025B5B1119F
07E:0 20000025B5B2100F
07E:0 20000025B5B1110F
07E:0 20000025B5B2101F
07E:0 20000025B5B1118F
07E:0 20000025B5B1112F
07E:0 20000025B5B211FF
07E:0 20000025B5B141EF
07E:0 20000025B5B1114F
07E:0 20000025B5B211DF
07E:0 20000025B5B141BF
07E:0 20000025B5B1116F
07E:0 20000025B5B211AF
07E:0 20000025B5B141DF
07E:0 20000025B5B1113F
07E:0 20000025B5B2108F
07E:0 20000025B5B141FF
07E:0 20000025B5B1111F
07E:0 20000025B5B211EF
07E:0 20000025B5B141CF
07E:0 20000025B5B1115F
07E:0 20000025B5B211BF
sauravrohilla
859 Posts
2
December 29th, 2013 22:00
all the directors port(that the device is mapped to) should be zoned to both the SP.
regrds,
Saurabh
Hari-CC
3 Posts
0
December 30th, 2013 10:00
Thanks for both of your reply , Yes you are correct after mapping is dose as per requirement i was able to create OR session and was able to start the migration .
Thanks for your help .